| 1 |
Effect of magnetic field on convection heat transfer inside a tilted square enclosure
Mohsen Pirmohammadi, Majid Ghassemi · International Communications in Heat and Mass Transfer
|
26 Apr 2009 |
242 |
| 2 |
Factors Influencing Unsafe Behaviors and Accidents on Construction Sites: A Review
Yahya Khosravi, Hassan Asilian Mahabadi, Ebrahim Hajizadeh et al. · International Journal of Occupational Safety and Ergonomics
Open access |
2014 |
228 |
| 3 |
Preparation of physically modified oat starch with different sonication treatments
Seid Reza Falsafi, Yahya Maghsoudlou, Hadis Rostamabadi et al. · Food Hydrocolloids
|
29 Oct 2018 |
204 |
| 4 |
Investigation on cristobalite crystallization in silica-based ceramic cores for investment casting
Arqavan Kazemi, M.A. Faghihi-Sani, H.R. Alizadeh · Journal of the European Ceramic Society
|
2 Aug 2013 |
181 |
| 5 |
Implementation of multilayer perceptron (MLP) and radial basis function (RBF) neural networks to predict solution gas-oil ratio of crude oil systems
Aref Hashemi Fath, Farshid Madanifar, Masood Abbasi · Petroleum
Open access |
12 Dec 2018 |
177 |
| 6 |
Effect of nano-particles on forced convection in sinusoidal-wall channel
Hadi Heidary, M.J. Kermani · International Communications in Heat and Mass Transfer
|
20 Sep 2010 |
175 |
| 7 |
Shape memory performance assessment of FDM 3D printed PLA-TPU composites by Box-Behnken response surface methodology
Davood Rahmatabadi, Kianoosh Soltanmohammadi, Mostafa Pahlavani et al. · The International Journal of Advanced Manufacturing Technology
Open access |
22 May 2023 |
156 |
| 8 |
Data driven approach for fault detection and diagnosis of turbine in thermal power plant using Independent Component Analysis (ICA)
Ali Ajamı, Mahdi S. M. H. Daneshvar · International Journal of Electrical Power & Energy Systems
|
10 Jul 2012 |
135 |
| 9 |
Superhydrophobic cotton fabrics coated by chitosan and titanium dioxide nanoparticles with enhanced antibacterial and UV-protecting properties
Mahdieh Raeisi, Yasaman Kazerouni, Anahita Mohammadi et al. · International Journal of Biological Macromolecules
|
7 Jan 2021 |
128 |
| 10 |
Aeromechanical optimization of first row compressor test stand blades using a hybrid machine learning model of genetic algorithm, artificial neural networks and design of experiments
Mohammad Ghalandari, Alireza Ziamolki, Amir Mosavi et al. · Engineering Applications of Computational Fluid Mechanics
Open access |
2019 |
121 |
| 11 |
Ultra-preconcentration and determination of thirteen organophosphorus pesticides in water samples using solid-phase extraction followed by dispersive liquid–liquid microextraction and gas chromatography with flame photometric detection
Soheila Samadi, Hassan Sereshti, Yaghoub Assadi · Journal of Chromatography A
|
20 Nov 2011 |
115 |
| 12 |
Corrosion of mild steel in hydrochloric acid solution in the presence of two cationic gemini surfactants with and without hydroxyl substituted spacers
Mohammad Mahdavian, Ali Reza Tehrani‐Bagha, Eiman Alibakhshi et al. · Corrosion Science
|
23 Mar 2018 |
104 |
| 13 |
A Privacy-Preserving Homomorphic Scheme With Multiple Dimensions and Fault Tolerance for Metering Data Aggregation in Smart Grid
Amin Mohammadali, Mohammad Sayad Haghighi · IEEE Transactions on Smart Grid
|
5 Jan 2021 |
99 |
| 14 |
Multi-objective optimization and exergo-economic assessment of a solar-biomass multi-generation system based on externally-fired gas turbine, steam and organic Rankine cycle, absorption chiller and multi-effect desalination
Navid Nazari, Soheil Porkhial · Applied Thermal Engineering
|
Jun 2020 |
98 |
| 15 |
Speciation of As(III) and As(V) in water samples by graphite furnace atomic absorption spectrometry after solid phase extraction combined with dispersive liquid–liquid microextraction based on the solidification of floating organic drop
Mojtaba Shamsipur, Nazir Fattahi, Yaghoub Assadi et al. · Talanta
|
Jul 2014 |
98 |
| 16 |
Comparative assessment of engine performance and emissions fueled with three different biodiesel generations
Sara Tayari, Reza Abedi, Abbas Rahi · Renewable Energy
|
17 Sep 2019 |
96 |
| 17 |
Thermal analysis of locomotive wheel-mounted brake disc
Behnam Ghadimi, Farshad Kowsary, Majid Khorami · Applied Thermal Engineering
|
7 Nov 2012 |
95 |
| 18 |
Framework for Continuous Assessment and Improvement of Occupational Health and Safety Issues in Construction Companies
Shahram Mahmoudi, Fakhradin Ghasemi, Iraj Mohammadfam et al. · Safety and Health at Work
Open access |
16 Jun 2014 |
93 |
| 19 |
Failure analysis of gas turbine first stage blade made of nickel-based superalloy
Ali Mohammad Kolagar, Nooshin Salman Tabrizi, Mohammad Cheraghzadeh et al. · Case Studies in Engineering Failure Analysis
Open access |
Apr 2017 |
92 |
| 20 |
Study on dissimilar friction stir butt welding of AA7075-O and AA2024-T4 considering the manufacturing limitation
Pouya Bahemmat, Mohammad Haghpanahi, Mohammad Kazem Besharati Givi et al. · The International Journal of Advanced Manufacturing Technology
|
6 Aug 2011 |
91 |
| 21 |
Synthesis and application of CoWO4 nanoparticles for degradation of methyl orange
Farhad Ahmadi, Mehdi Rahimi‐Nasrabadi, Ali Fosooni et al. · Journal of Materials Science Materials in Electronics
|
24 May 2016 |
90 |
| 22 |
Construction of La-doped TiO 2 @La-doped ZnO–B-doped reduced graphene oxide ternary nanocomposites for improved visible light photocatalytic activity
Mojtaba Rostami · RSC Advances
Open access |
2017 |
89 |
| 23 |
Effect of zircon content on chemical and mechanical behavior of silica-based ceramic cores
Arqavan Kazemi, M.A. Faghihi-Sani, Mohammad Javad Nayyeri et al. · Ceramics International
|
11 Jul 2013 |
87 |
| 24 |
Stochastic dynamic simulation of a novel hybrid thermal-compressed carbon dioxide energy storage system (T-CCES) integrated with a wind farm
Farzin Chaychizadeh, Hojat Dehghandorost, Abbas Aliabadi et al. · Energy Conversion and Management
|
3 May 2018 |
86 |
| 25 |
Investigations on the Effects of the Tool Material, Geometry, and Tilt Angle on Friction Stir Welding of Pure Titanium
Ramin Seighalani, M.K. Besharati Givi, Ali M. Nasiri et al. · Journal of Materials Engineering and Performance
|
9 Dec 2009 |
84 |
| 26 |
Comparative toxicity of silver nanoparticle and ionic silver in juvenile common carp (Cyprinus carpio): Accumulation, physiology and histopathology
Kheyrollah Khosravi‐Katuli, Ali Shabani, Hamed Paknejad et al. · Journal of Hazardous Materials
|
23 Jul 2018 |
83 |
| 27 |
Exergy-based optimization of an organic Rankine cycle (ORC) for waste heat recovery from an internal combustion engine (ICE)
Seyedali Seyedkavoosi, Saeed Javan, Krishna M. Kota · Applied Thermal Engineering
|
20 Jul 2017 |
81 |
| 28 |
Condition-based maintenance effectiveness for series–parallel power generation system—A combined Markovian simulation model
Ali Azadeh, Seyed Mohammad Asadzadeh, Niloufar Salehi et al. · Reliability Engineering & System Safety
|
13 May 2015 |
81 |
| 29 |
Vibration analysis of rectangular Mindlin plates on elastic foundations and vertically in contact with stationary fluid by the Ritz method
Shahrokh Hosseini-Hashemi, Mahmoud Karimi, Hossein Rokni Damavandi Taher · Ocean Engineering
|
12 Dec 2009 |
80 |
| 30 |
On the horizon of greener pathways to travel into a greener future portal: Green MXenes, environment-friendly synthesis, and their innovative applications
Ali Mohammad Amani, Lobat Tayebi, Ehsan Vafa et al. · Journal of Cleaner Production
|
2024 |
78 |
| 31 |
Sensivity analysis of a multi-generation system based on a gas/hydrogen-fueled gas turbine for producing hydrogen, electricity and freshwater
Mohammad Amin Javadi, Siavash Khodabakhshi, Ramin Ghasemiasl et al. · Energy Conversion and Management
|
6 Dec 2021 |
75 |
| 32 |
Study on mechanical, micro-, and macrostructural characteristics of dissimilar friction stir welding of AA6061-T6 and AA7075-T6
Pouya Bahemmat, Mohammad Haghpanahi, M. K. Besharati et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
|
23 Jun 2010 |
75 |
| 33 |
Fault detection and diagnosis of an industrial steam turbine using a distributed configuration of adaptive neuro-fuzzy inference systems
Karim Salahshoor, Majid Soleimani Khoshro, Mojtaba Dolat Kordestani · Simulation Modelling Practice and Theory
|
5 Feb 2011 |
72 |
| 34 |
Physicochemical and morphological properties of resistant starch type 4 prepared under ultrasound and conventional conditions and their in-vitro and in-vivo digestibilities
Seid Reza Falsafi, Yahya Maghsoudlou, Mehran Aalami et al. · Ultrasonics Sonochemistry
Open access |
28 Dec 2018 |
71 |
| 35 |
Characterization of rudist-dominated units as potential reservoirs in the middle Cretaceous Sarvak Formation, SW Iran
Behrooz Esrafili-Dizaji, Hossain Rahimpour‐Bonab, Hamzeh Mehrabi et al. · Facies
|
26 May 2015 |
69 |
| 36 |
Effect of Chlorella vulgaris methyl ester enriched with hydrogen on performance and emission characteristics of CI engine
Sara Tayari, Reza Abedi · Fuel
|
7 Aug 2019 |
66 |
| 37 |
Hot tearing in polycrystalline Ni-based IN738LC superalloy: Influence of Zr content
D. Heydari, A. Shahkaram Fard, Ali Bakhshi et al. · Journal of Materials Processing Technology
Open access |
23 Oct 2013 |
63 |
| 38 |
Electricity price forecasting using Support Vector Machines by considering oil and natural gas price impacts
Ali Shiri, Mohammad Afshar, Ashkan Rahimi‐Kian et al.
Conference paper |
Aug 2015 |
63 |
| 39 |
Heat transfer enhancement in a channel with block(s) effect and utilizing Nano-fluid
Hadi Heidary, M.J. Kermani · International Journal of Thermal Sciences
|
6 Mar 2012 |
63 |
| 40 |
Surprising Incentive: An Instrument for Promoting Safety Performance of Construction Employees
Fakhradin Ghasemi, Iraj Mohammadfam, Ali Reza Soltanian et al. · Safety and Health at Work
Open access |
11 Apr 2015 |
63 |
| 41 |
DIC-based experimental study of fracture toughness through R-curve tests in a multi-layered Al-Mg (LZ91) composite fabricated by ARB
Davood Rahmatabadi, Mina Ahmadi, Mostafa Pahlavani et al. · Journal of Alloys and Compounds
|
17 Jun 2021 |
61 |
| 42 |
Influence of capping agents additives on morphology of CeVO4 nanoparticles and study of their photocatalytic properties
Mehdi Rahimi‐Nasrabadi, Farhad Ahmadi, Ali Fosooni · Journal of Materials Science Materials in Electronics
|
23 Aug 2016 |
60 |
| 43 |
Intracellular T cell cytokines in patients with B cell chronic lymphocytic leukaemia (B‐CLL)
Eva D. Rossmann, Nongnit Laytragoon Lewin, Mahmood Jeddi‐Tehrani et al. · European Journal Of Haematology
|
May 2002 |
60 |
| 44 |
Microstructure-performance relationships in gas tungsten arc welded Hastelloy X nickel-based superalloy
Ali Ghasemi, Ali Mohammad Kolagar, M. Pouranvari · Materials Science and Engineering A
|
8 Jul 2020 |
57 |
| 45 |
Synthesis and biosensor application of Ag@Au bimetallic nanoparticles based on localized surface plasmon resonance
Tayebeh Ghodselahi, Soudabeh Arsalani, T. Neishaboorynejad · Applied Surface Science
|
18 Feb 2014 |
57 |
| 46 |
Enhancement of power quality issues for a hybrid AC/DC microgrid based on optimization methods
Nima Khosravi, Salwa Echalih, Rasoul Baghbanzadeh et al. · IET Renewable Power Generation
Open access |
20 Apr 2022 |
55 |
| 47 |
Effects of ZnO nanoparticles in the Caspian roach (Rutilus rutilus caspicus)
Kheyrollah Khosravi‐Katuli, Giusy Lofrano, H. Pak Nezhad et al. · The Science of The Total Environment
|
11 Jan 2018 |
55 |
| 48 |
Fabrication LSPR sensor chip of Ag NPs and their biosensor application based on interparticle coupling
Tayebeh Ghodselahi, T. Neishaboorynejad, Soudabeh Arsalani · Applied Surface Science
|
7 Feb 2015 |
55 |
| 49 |
Ultrasonic Assisted Deep Drilling of Inconel 738LC Superalloy
V. Baghlani, P. Mehbudi, Javad Akbari et al. · Procedia CIRP
Open access |
2013 |
54 |
| 50 |
Effect of electromagnetic field on membrane fouling in reverse osmosis process
Mohammad Rouina, Hamid‐Reza Kariminia, Seyyed Abbas Mousavi et al. · Desalination
|
28 May 2016 |
52 |