Most cited papers from Metso (Sweden)
What are the most cited papers from Metso (Sweden)?
The most cited paper from Metso (Sweden) is "Using an oxygen-carrier as bed material for combustion of biomass in a 12-MWth circulating fluidized-bed boiler" (Henrik Thunman, Fredrik Lind, Claes Breitholtz et al., 2013), with 149 citations. Next come "Properties of medium-density fibreboard (MDF) based on wheat straw and melamine modified urea formaldehyde (UMF) resin" (135) and "Manufacture of non-resin wheat straw fibreboards" (111).
Showing 44 of 44 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Using an oxygen-carrier as bed material for combustion of biomass in a 12-MWth circulating fluidized-bed boiler Henrik Thunman, Fredrik Lind, Claes Breitholtz et al. · Fuel | 13 Jun 2013 | 149 |
| 2 | Properties of medium-density fibreboard (MDF) based on wheat straw and melamine modified urea formaldehyde (UMF) resin Sören Halvarsson, Håkan Edlund, Magnus Norgren · Industrial Crops and Products | 12 Mar 2008 | 135 |
| 3 | Manufacture of non-resin wheat straw fibreboards Sören Halvarsson, Håkan Edlund, Magnus Norgren · Industrial Crops and Products | 29 Oct 2008 | 111 |
| 4 | Catalytic depolymerisation and conversion of Kraft lignin into liquid products using near-critical water Thi Dieu Huyen Nguyen, Marco Maschietti, Tallal Belkheiri et al. · The Journal of Supercritical Fluids | 12 Dec 2013 | 100 |
| 5 | Towards integrated geometallurgical approach: Critical review of current practices and future trends V. V. Lishchuk, Pierre-Henri Koch, Yousef Ali Ghorbani et al. · Minerals Engineering | 24 Oct 2019 | 72 |
| 6 | Thermal Modelling of the Ladle Preheating Process Björn Glaser, Mårten Görnerup, Du Sichen · steel research international | 11 Oct 2011 | 41 |
| 7 | Fluid Flow and Heat Transfer in the Ladle during Teeming Björn Glaser, Mårten Görnerup, Du Sichen · steel research international | 24 Mar 2011 | 31 |
| 8 | Status of fabrication development for plasma facing components in the EU Wolfgang DAENNER et al. · Fusion Engineering and Design | Nov 2002 | 27 |
| 9 | Heat transfer in evaporating black liquor falling film Marie Johansson, Lennart Vamling, Lars Olausson · International Journal of Heat and Mass Transfer | 22 Feb 2009 | 25 |
| 10 | Heat transfer for falling film evaporation of black liquor up to very high Prandtl numbers Erik Karlsson, Mathias Gourdon, Lars Olausson et al. · International Journal of Heat and Mass Transfer | 30 Jul 2013 | 23 |
| 11 | Study of the rotational diffusivity coefficient of fibres in planar contracting flows with varying turbulence levels Marko Hyensjö, ANDERS A. DAHLKILD · International Journal of Multiphase Flow | 22 Feb 2008 | 19 |
| 12 | Mechanical Pulping: Influence of temperature on energy efficiency in double disc chip refining Dino Muhić, Lars Sundström, Christer Peter Sandberg et al. · Nordic Pulp & Paper Research Journal | Dec 2010 | 17 |
| 13 | Crystallization in a Pilot Evaporator: Aqueous Solutions of Na 2 CO 3 and Na 2 SO 4 Mathias Gourdon, Lennart Vamling, Ulf R. Andersson et al. · Industrial & Engineering Chemistry Research | 8 Feb 2010 | 16 |
| 14 | Impact of impregnation on high kappa number hardwood pulps PETER W. HART, Gary W. Colson, Stefan Antonsson et al. · BioResources | 28 Oct 2011 | 16 |
| 15 | Falling film hydrodynamics of black liquor under evaporative conditions Marie Johansson, Ira Leifer, Lennart Vamling et al. · International Journal of Heat and Mass Transfer | 15 Feb 2009 | 14 |
| 16 | Mechanical Pulping: Energy efficiency in double disc refining -Influence of intensity by segment design Dino Muhić, Juha-Pekka Huhtanen, Lars Sundström et al. · Nordic Pulp & Paper Research Journal | Aug 2011 | 14 |
| 17 | Modelling the effect of shear flow on fibre orientation anisotropy in a planar contraction Marko Hyensjö, ANDERS A. DAHLKILD, Paul Krochak et al. · Nordic Pulp & Paper Research Journal | Aug 2007 | 13 |
| 18 | The Drying Kinetics and Equilibrium Moisture Content of MDF Fibers Emma Fritzell, Olof Melander, Anders Rasmuson · Drying Technology | 13 Aug 2009 | 13 |
| 19 | Near Wall Studies of Pulp Suspension Flow Using LDA A. Johan Pettersson, Tomas Wikström, Anders Rasmuson · The Canadian Journal of Chemical Engineering | Aug 2006 | 13 |
| 20 | Measurement and analysis of flow of concentrated fiber suspensions through a 2‐D sudden expansion using UVP Julia Claesson, Anders Rasmuson, Johan Wiklund et al. · AIChE Journal | 27 Jun 2012 | 12 |
| 21 | Mathematical Modeling of Heat, Mass, and Momentum Transport in MDF Fiber Drying Olof Melander, Anders Rasmuson · Drying Technology | 7 Dec 2010 | 12 |
| 22 | PIV measurements of velocities and concentrations of wood fibres in pneumatic transport Olof Melander, Anders Rasmuson · Experiments in Fluids | 4 Jun 2004 | 12 |
| 23 | Scale formation and growth when evaporating black liquor with high carbonate to sulphate ratio Mathias Gourdon, Daniel Strömblad, Lars Olausson et al. · Nordic Pulp & Paper Research Journal | May 2008 | 12 |
| 24 | A new correlation for the onset of fluidisation in pulp suspensions Tomas Wikström, Ylva Rönnmark, Anders Rasmuson · Nordic Pulp & Paper Research Journal | Dec 2002 | 12 |
| 25 | A study of microstructural factors governing strength and ductility of titanium alloys fabricated by powder bed fusion additive manufacturing Changji Xuan · Journal of Alloys and Compounds | 11 Apr 2023 | 10 |
| 26 | Near wall effects in the plug flow of pulp suspensions Helena Fock, Julia Claesson, Anders Rasmuson et al. · The Canadian Journal of Chemical Engineering | 9 Feb 2011 | 10 |
| 27 | Report: Waste refinery in the municipality of Borås Andreas Johansson, Evalena Blomqvist, Annika Ekvall et al. · Waste Management & Research The Journal for a Sustainable Circular Economy | 29 May 2007 | 9 |
| 28 | Studying the cure kinetics of rubber-to-metal bonding agents using DMTA Sture Persson, M. Goude, Tomas Olsson · Polymer Testing | 30 Apr 2003 | 9 |
| 29 | Improved Resistance towards Hydrogen Induced Stress Cracking (HISC) of Hot Isostatically Pressed (HIP) Duplex Stainless Steels under Cathodic Protection Gro Østensen Lauvstad, Roy Johnsen, Martin Bjurström et al. | 11 Mar 2007 | 8 |
| 30 | CFD modeling of non-Newtonian fluid mixing accounting for transient changes in local solids concentration – application to an agitated pulp stock chest Helena Fock, Anders Rasmuson, Tomas Wikström · Nordic Pulp & Paper Research Journal | 2010 | 4 |
| 31 | Simulation and measurement of velocity and concentration of dry wood fibres flowing through a throttle Olof Melander, Anders Rasmuson · Nordic Pulp & Paper Research Journal | 2005 | 4 |
| 32 | Flow regimes of air suspensions of MDF fibres in vertical flow Olof Melander, Tomas Wikström, Anders Rasmuson · Nordic Pulp & Paper Research Journal | May 2006 | 4 |
| 33 | A dispersion force approach to modelling the effect of lift forces on fibre dispersion Olof Melander, Anders Rasmuson · International Journal of Multiphase Flow | 28 Oct 2006 | 4 |
| 34 | Effect of Eucalypt Pulp Pretreatment with Hot Acid Hydrolysis on (aZe)DP and (aZe)(EP)P Bleaching Performance Valéria Juste Gomes, André Luiz Sena Guimarães, Jorge Luiz Colodette et al. · Journal of Wood Chemistry and Technology | 9 Jul 2015 | 4 |
| 35 | Crystallization in a pilot evaporator – Comparison between black liquor and black liquor model substances Mathias Gourdon, Lars Olausson, Lennart Vamling · Nordic Pulp & Paper Research Journal | 2010 | 2 |
| 36 | A Stop-the-World Debugger for Erlang (and the BEAM) Daniel Gorín, Björn Gustavsson, Roberto Aloi | 9 Oct 2025 | 1 |
| 37 | PAPER PHYSICS: An experimental study of the turbulent mixing layer in concentrated fiber suspensions Julia Claesson, Anders Rasmuson, Tomas Wikström · Nordic Pulp & Paper Research Journal | Dec 2012 | 1 |
| 38 | MECHANICAL PULPING: Two-photon autofluorescence spectral imaging applied to probe process-effects in thermomechanical pulp refining Jonas Hafrén, Dino Muhić, Hans C. Gerritsen et al. · Nordic Pulp & Paper Research Journal | Dec 2011 | 1 |
| 39 | The development of a near-wall boundary layer over a flat plate in concentrated pulp fiber suspensions Julia Claesson, Tomas Wikström, Anders Rasmuson · Nordic Pulp & Paper Research Journal | Aug 2013 | 1 |
| 40 | Flow of concentrated fiber suspensions over a backward facing step studied using LDA Julia Claesson, Tomas Wikström, Anders Rasmuson · Nordic Pulp & Paper Research Journal | 28 Jun 2012 | 1 |
| 41 | Non-evaporating black liquor falling film hydrodynamics Miriam Johansson, Lennart Vamling, Lars Olausson · Nordic Pulp & Paper Research Journal | 2009 | 1 |
| 42 | Automated ASTM-E45 Inclusion Classification Using Deterministic Image Analysis Hannes Zedel, Mårten Görnerup, Ragnhild Elizabeth Aune · The minerals, metals & materials series | 2026 | 0 |
| 43 | Automated Metal Cleanliness Analyzer (AMCA): A Multi-class Framework for Inclusion Classification in Aluminum Melt Analysis Hannes Zedel, Mårten Görnerup, Robert Fritzsch et al. · The minerals, metals & materials series | 2026 | 0 |
| 44 | Turbulence models for falling film hydrodynamics and heat transfer compared with experimental values for black liquor Miriam Johansson, Lennart Vamling, Lars Olausson · Nordic Pulp & Paper Research Journal | Aug 2008 | 0 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.