Most cited papers from Motor Jikov (Czechia)

Motor Jikov (Czechia)

What are the most cited papers from Motor Jikov (Czechia)?

The most cited paper from Motor Jikov (Czechia) is "Hydration of Complexes of Some Univalent Cations with Polyethylene Glycol Ligands in Nitrobenzene Saturated with Water" (Emanuel Makrlík, 1992), with 146 citations. Next come "The Extraction of Strontium and Barium with a Solution of Bis-1,2-Dicarbollylcobaltate in Nitrobenzene in the Presence of 18-Crown-6" (80) and "A biosensor for the determination of amylase activity" (56).

Published TypeFieldAccess

Showing 41 of 41 papers. Every paper is listed.

Most cited papers, sortable by citations and release date
#	Paper
1	Hydration of Complexes of Some Univalent Cations with Polyethylene Glycol Ligands in Nitrobenzene Saturated with Water Emanuel Makrlík · Collection of Czechoslovak Chemical Communications	1992	146
2	The Extraction of Strontium and Barium with a Solution of Bis-1,2-Dicarbollylcobaltate in Nitrobenzene in the Presence of 18-Crown-6 Petr Vaňura, Emanuel Makrlík · Collection of Czechoslovak Chemical Communications	1993	80
3	A biosensor for the determination of amylase activity Ludmila Zajoncová, Milan Jı́lek, Veronika Beranová et al. · Biosensors and Bioelectronics	28 Feb 2004	56
4	Contribution to the thermodynamics of complexes of nickel(II), iron(II) and iron(III) with 1,10-phenanthroline and 2,2'-bipyridine in the two-phase water-nitrobenzene extraction system Emanuel Makrlík, Petr Vaňura · Journal of Electroanalytical Chemistry	Jul 1990	16
5	Stability constants of tris(2,2′-bipyridine) complexes of Fe2+, Co2+, Ni2+, Cu2+ and Zn2+ in 1,2-dichloroethane saturated with water Emanuel Makrlík, Petr Vaňura · Colloids and Surfaces	Nov 1992	10
6	Stability of NH4+ and [Zn(NH3)4]2+ in nitrobenzene saturated with water Emanuel Makrlík · Collection of Czechoslovak Chemical Communications	1990	9
7	Aluminum Melt Degassing Process Evaluation Depending on the Design and the Degree of the FDU Unit Graphite Rotor Wear Martin Podařil, Tomáš Prášil, Ján Majerník et al. · Materials Open access	15 Jul 2022	8
8	Thermodynamic parameters characterizing 8-hydroxyquinoline at the water/nitrobenzene interface Emanuel Makrlík · Journal of Colloid and Interface Science	Apr 1992	8
9	Using Physical Modeling to Optimize the Aluminium Refining Process Tomáš Prášil, Ladislav Socha, Karel Gryc et al. · Materials Open access	21 Oct 2022	7
10	Impact of Rotor Material Wear on the Aluminum Refining Process Tomáš Prášil, Ladislav Socha, Karel Gryc et al. · Materials Open access	23 Jun 2022	7
11	Impact of Rotor Design on Its Wear and Work Efficiency of the Aluminum Refining Process Tomáš Prášil, Ladislav Socha, Karel Gryc et al. · Metals Open access	24 Oct 2022	5
12	Contribution to the thermodynamics of bromophenol blue in the two-phase water-nitrobenzene extraction system Emanuel Makrlík · Collection of Czechoslovak Chemical Communications	1990	5
13	Assessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions Ladislav Socha, Tomáš Prášil, Karel Gryc et al. · Scientific Reports Open access	16 Jan 2024	3
14	Research on the impact of rotor wear on the effectiveness of the aluminium refining process Ladislav Socha, Tomáš Prášil, Karel Gryc et al. · Scientific Reports Open access	18 Oct 2023	3
15	Chemical equilibria including particles I-, I3-, I5-, and I2 in two-phase water-nitrobenzene extraction system Emanuel Makrlík · Collection of Czechoslovak Chemical Communications	1990	3
16	Ph effect of aqueous phase of a two immiscible liquid phases system on ion transfer across phase interface under conditions of electrolyte dropping electrode Emanuel Makrlík · Journal of Colloid and Interface Science	Jun 1990	3
17	Comparison of Degassing Efficiency on a Foundry Degassing Unit Using Different Rotor Types Jan Kolínský, Tomáš Prášil, Ladislav Socha et al. · Applied Sciences Open access	6 Mar 2024	2
18	Optimization of numerical simulations of gravity casting of ductile iron castings Karel Gryc, Ladislav Socha, Jana SVIŽELOVÁ et al. · Metal ... Conference paperOpen access	2021	2
19	The processing of experimental data from the physical model of A fdu refining unit Jan Kolínský, Tomáš Prášil, Ladislav Socha et al. · Metal ... Conference paperOpen access	2023	1
20	Optimization of operating conditions of aluminum melt refining process in laboratory conditions Ladislav Socha, Karel Gryc, Jana SVIŽELOVÁ et al. · Metal ... Conference paperOpen access	2021	1
21	Assessment of rotary impeller efficiency by physical modelling of an aluminum refining process Ladislav Socha, Karel Gryc, Jana SVIŽELOVÁ et al. · Metal ... Conference paperOpen access	2021	1
22	Industrial Potential of Additively Manufactured H13 Steel Components: A Service Life Study Martin PINTA, Ladislav Socha, Ludmila Kučerová et al. · Archives of Foundry Engineering Open access	21 Sep 2026	0
23	Dimensional and shape analysis of an additively manufactured DIEVAR tool steel mold component with a conventional design for die casting Tomáš Sellner, Ladislav Socha, Miloslav ROH · Rapid Prototyping Journal Open access	24 Jun 2026	0
24	A Study of the Mechanical Properties of Conventional and Additive Mould Parts for Die Casting of Aluminum Alloys Martin PINTA, Ladislav Socha, Jana SVIŽELOVÁ et al. · Archives of Foundry Engineering Open access	19 Dec 2025	0
25	Efficiency of aluminium refining on a foundry degassing unit depending on the rotor geometry and the degree of its wear Jan Kolínský, Ladislav Socha, Jana SVIŽELOVÁ et al. · Scientific Reports Open access	22 Jul 2025	0
26	Numerical Simulation of Multiphase Flow in a Physical Model of a Foundry Degassing Unit Lukáš Manoch, Ladislav Socha, Jana SVIŽELOVÁ et al. · Archives of Foundry Engineering Open access	13 Jun 2025	0
27	Quality Analysis of Mould Insert Produced by Additive Technology Martin PINTA, Ladislav Socha, Karel Gryc et al. · Archives of Foundry Engineering Open access	3 Feb 2025	0
28	Design of Conformal Cooling of an Additively Printed Aluminium Die-Casting Mold Component Jana SVIŽELOVÁ, Ladislav Socha, A. Mohamed et al. · Archives of Foundry Engineering Open access	23 Dec 2024	0
29	Dimensional and Shape Analysis of Additively Manufactured Shaped Parts of DIEVAR Steel Moulds T. Sellner, Ladislav Socha, Karel Gryc et al. · Archives of Foundry Engineering Open access	10 Oct 2024	0
30	THE POSSIBILITIES OF STUDYING THE LIFETIME OF ADDITIVELY MANUFACTUREDSHAPED MOLD PARTS Martin PINTA, Ladislav Socha, Karel Gryc et al. · Metal ... Conference paperOpen access	2023	0
31	TESTING FLORAL MOTIFS FOR CREATION FOR CHILDREN IN KINDERGARTEN Alena SEDLÁČKOVÁ, Petr Simbartl · Trends in Education Open access	Feb 2022	0
32	Physical modelLing of aluminum melt degassing in low-pressure die casting conditions Ladislav Socha, Tomáš Prášil, Karel Gryc et al. · Metal ... Conference paperOpen access	2022	0
33	Analysis of the influence of the gating system shape on the filling and solidification of ductile iron castings Karel Gryc, Ladislav Socha, Jana SVIŽELOVÁ et al. · Metal ... Conference paperOpen access	2022	0
34	Study of shape and dimensional accuracy in the production of ductile iron castings using 3D scanning Karel Gryc, Ladislav Socha, Tomáš Prášil et al. · Metal ... Conference paperOpen access	2022	0
35	Study of aluminum melt refining process efficiency depending on impeller wear Ladislav Socha, Karel Gryc, Jana SVIŽELOVÁ et al. · Metal ... Conference paperOpen access	2021	0
36	Toplinski plašt građevine - nenosivi vanjski elementi; prozori i vrata Jasmina Ovčar · University of Zagreb University Computing Centre (SRCE) Open access	21 Jun 2012	0
37	Grijanje - održiva gradnja Jasmina Ovčar · Hrčak Portal of scientific journals of Croatia (University Computing Centre) Open access	27 Dec 2012	0
38	Thermodynamic parameters characterizing Bromophenol Blue and Bromocresol Green in the two-phase water-1,2-dichloroethane extraction system Emanuel Makrlík · Colloids and Surfaces	Dec 1991	0
39	Thermodynamic parameters characterizing complexes of alkali metal cations with dibenzo-24-crown-8 in the water—nitrobenzene extraction system Emanuel Makrlík · Colloids and Surfaces	Nov 1992	0
40	Contribution to the Cs+ transfer across the water/1,2-dichloroethane interface Emanuel Makrlík · Journal of Colloid and Interface Science	Sep 1991	0
41	Ionic product of water in the nitrobenzene phase of the two-phase water-nitrobenzene extraction system Emanuel Makrlík · Collection of Czechoslovak Chemical Communications	1991	0

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.