Institution · Rolls-Royce (United Kingdom)
Most cited papers from Rolls-Royce (United Kingdom)
Rolls-Royce (United Kingdom)
What are the most cited papers from Rolls-Royce (United Kingdom)?
The most cited paper from Rolls-Royce (United Kingdom) is "Direct Active and Reactive Power Control of DFIG for Wind Energy Generation" (Lie Xu, P. Cartwright, 2006), with 739 citations. Next come "The precipitation of topologically close-packed phases in rhenium-containing superalloys" (661) and "High performance cutting of advanced aerospace alloys and composite materials" (571).
Showing 50 of 60 papers. Every paper with more than 191 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Direct Active and Reactive Power Control of DFIG for Wind Energy Generation Lie Xu, P. Cartwright · IEEE Transactions on Energy Conversion | 23 Aug 2006 | 739 |
| 2 | The precipitation of topologically close-packed phases in rhenium-containing superalloys Catherine M. F. Rae, R.C. Reed · Acta Materialia | Nov 2001 | 661 |
| 3 | High performance cutting of advanced aerospace alloys and composite materials Rachid M’Saoubi, Dragos A. Axinte, Sein Leung Soo et al. · CIRP Annals | 2015 | 571 |
| 4 | Microstructural and texture development in direct laser fabricated IN718 Lakshmi Lavanya Parimi, G.A. Ravi, Daniel Clark et al. · Materials Characterization | 3 Jan 2014 | 568 |
| 5 | The generation of nearly isotropic turbulence by means of grids P. E. Roach · International Journal of Heat and Fluid Flow | Jun 1987 | 552 |
| 6 | Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys Fionn P.E. Dunne, David J. Rugg, Adrian Walker · International Journal of Plasticity | 3 Feb 2007 | 533 |
| 7 | Video Processing From Electro-Optical Sensors for Object Detection and Tracking in a Maritime Environment: A Survey Dilip Kumar Prasad, Deepu Rajan, Lily Rachmawati et al. · IEEE Transactions on Intelligent Transportation Systems | 10 Jan 2017 | 491 |
| 8 | Cobot programming for collaborative industrial tasks: An overview Shirine El Zaatari, Mohamed Marei, Weidong Li et al. · Robotics and Autonomous Systems | 18 Mar 2019 | 472 |
| 9 | Methods to reduce the thermal conductivity of EB-PVD TBCs John Rayment Nicholls, K.J. Lawson, A. Johnstone et al. · Surface and Coatings Technology | Mar 2002 | 471 |
| 10 | Inertia Emulation Control Strategy for VSC-HVDC Transmission Systems Jiebei Zhu, Campbell David Booth, Grain Philip Adam et al. · IEEE Transactions on Power Systems | May 2013 | 464 |
| 11 | The role of shear-layer instability waves in jet exhaust noise C. J. Moore · Journal of Fluid Mechanics | 25 Apr 1977 | 463 |
| 12 | Heat treatment of UDIMET 720Li: the effect of microstructure on properties M. P. Jackson, Roger C. Reed · Materials Science and Engineering A | 1999 | 454 |
| 13 | Exploiting AIS Data for Intelligent Maritime Navigation: A Comprehensive Survey From Data to Methodology Enmei Tu, Guanghao Zhang, Lily Rachmawati et al. · IEEE Transactions on Intelligent Transportation Systems | 4 Sep 2017 | 447 |
| 14 | The effect of machined topography and integrity on fatigue life Donka Novovic, Richard C. Dewes, D.K. Aspinwall et al. · International Journal of Machine Tools and Manufacture | 13 Dec 2003 | 437 |
| 15 | Microstructures of laser-deposited Ti–6Al–4V Xinhua Wu, Jing Long Liang, Junfa Mei et al. · Materials & Design (1980-2015) | 15 Nov 2003 | 431 |
| 16 | Optimal stress locations in finite element models John Barlow · International Journal for Numerical Methods in Engineering | 1976 | 396 |
| 17 | Origin of dramatic oxygen solute strengthening effect in titanium Qian Yu, Liang Qi, Tomohito Tsuru et al. · Science | 5 Feb 2015 | 395 |
| 18 | Structural eigenvalue problems - elimination of unwanted variables Bruce M. Irons · AIAA Journal | May 1965 | 385 |
| 19 | Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature Roger C. Reed, Narumol Matan, David Cox et al. · Acta Materialia | Sep 1999 | 353 |
| 20 | 1997 Best Paper Award—Turbomachinery Committee: A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial Compressor Thomas R. Camp, I. J. Day · Journal of Turbomachinery | Jul 1998 | 322 |
| 21 | Surface integrity in metal machining - Part II: Functional performance Andrea la Monaca, James W. Murray, Zhirong Liao et al. · International Journal of Machine Tools and Manufacture | 18 Mar 2021 | 317 |
| 22 | Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC) Paola Costamagna, Azra Selimovic, Marco Del Borghi et al. · Chemical Engineering Journal | 12 May 2004 | 310 |
| 23 | Intermetallic-matrix composites—a review C.M. Ward‐Close, Ray Minor, Phillip J. Doorbar · Intermetallics | 1996 | 308 |
| 24 | Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants A.A. Bauer, Steffen Neumeier, Florian Pyczak et al. · Scripta Materialia | 27 Aug 2010 | 301 |
| 25 | Easy Approach to Requirements Syntax (EARS) Alistair Mavin, Philip Wilkinson, Adrian Harwood et al. | Aug 2009 | 299 |
| 26 | Superplasticity in Ti–6Al–4V: Characterisation, modelling and applications Enrique Alabort, Duncan Putman, Roger C. Reed · Acta Materialia | 18 Jun 2015 | 298 |
| 27 | Interdiffusion in the face-centred cubic phase of the Ni–Re, Ni–Ta and Ni–W systems between 900 and 1300°C Mudith S. A. Karunaratne, Paul M. Carter, R.C. Reed · Materials Science and Engineering A | Apr 2000 | 296 |
| 28 | Development of a slender continuum robotic system for on-wing inspection/repair of gas turbine engines Xin Dong, Dragos A. Axinte, David J. Palmer et al. · Robotics and Computer-Integrated Manufacturing | 29 Sep 2016 | 289 |
| 29 | Three-Dimensional Separations in Axial Compressors Semiu A. Gbadebo, Nicholas A. Cumpsty, Tom P. Hynes · Journal of Turbomachinery | Apr 2005 | 281 |
| 30 | Microstructural characterisation of metallic shot peened and laser shock peened Ti–6Al–4V Steven J. Lainé, Kevin M. Knowles, Phillip J. Doorbar et al. · Acta Materialia | 29 Oct 2016 | 279 |
| 31 | A Study of Spike and Modal Stall Phenomena in a Low-Speed Axial Compressor Thomas R. Camp, I. J. Day · Volume 1: Aircraft Engine; Marine; Turbomachinery; Microturbines and Small Turbomachinery | 2 Jun 1997 | 271 |
| 32 | On the kinetics of rafting in CMSX-4 superalloy single crystals Narumol Matan, David Cox, Catherine M. F. Rae et al. · Acta Materialia | May 1999 | 267 |
| 33 | Short-wavelength free-electron laser sources and science: a review * Elaine A. Seddon, Jim A. Clarke, David J. Dunning et al. · Reports on Progress in Physics | 23 Oct 2017 | 255 |
| 34 | Modern Challenges Facing Turbomachinery Aeroacoustics N. Peake, Anthony B. Parry · Annual Review of Fluid Mechanics | Mar 2011 | 247 |
| 35 | Anisotropy in the hardness of single crystals Chris A. Brookes, J. B. O’Neill, B. A. W. Redfern · Proceedings of the Royal Society of London A Mathematical and Physical Sciences | 23 Mar 1971 | 246 |
| 36 | Interdiffusion of the platinum-group metals in nickel at elevated temperatures Mudith S. A. Karunaratne, R.C. Reed · Acta Materialia | 7 Apr 2003 | 237 |
| 37 | A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates Li Sun, Thomas Hadfield Simm, Tomas L. Martin et al. · Acta Materialia | 8 Mar 2018 | 235 |
| 38 | Shaped metal deposition of a nickel alloy for aero engine applications Dean Clark, M.R. Bache, Mark T. Whittaker · Journal of Materials Processing Technology | 4 Dec 2007 | 231 |
| 39 | Grain-boundary precipitation in Allvac 718Plus E.J. Pickering, Harshal N. Mathur, Ayan Bhowmik et al. · Acta Materialia | 5 Mar 2012 | 230 |
| 40 | Creep of CMSX-4 superalloy single crystals: effects of misorientation and temperature Narumol Matan, David Cox, Paul M. Carter et al. · Acta Materialia | Mar 1999 | 228 |
| 41 | Translaminar fracture toughness testing of composites: A review M.J. Laffan, S.T. Pinho, P. Robinson et al. · Polymer Testing | 25 Jan 2012 | 227 |
| 42 | Abrasive machining of advanced aerospace alloys and composites Fritz Klocke, Sein Leung Soo, Bernhard Karpuschewski et al. · CIRP Annals | 2015 | 227 |
| 43 | Normalised model-based processing diagrams for additive layer manufacture of engineering alloys Meurig Thomas, Gavin James Baxter, Iain Todd · Acta Materialia | 23 Feb 2016 | 223 |
| 44 | Chromia layer growth on a Ni-based superalloy: Sub-parabolic kinetics and the role of titanium Sam Cruchley, H.E. Evans, MARY P. TAYLOR et al. · Corrosion Science | 7 Jun 2013 | 221 |
| 45 | Sequential nucleation of phases in a 17-4PH steel: Microstructural characterisation and mechanical properties Guma Yeli, M.A. Auger, Keith Wilford et al. · Acta Materialia | Dec 2016 | 217 |
| 46 | The dislocation behaviour and GND development in a nickel based superalloy during creep S. Birosca, Gang Liu, Rengen Ding et al. · International Journal of Plasticity | 21 Feb 2019 | 215 |
| 47 | The strength of fused silica B.A. Proctor, I. Whitney, J.W. Johnson · Proceedings of the Royal Society of London A Mathematical and Physical Sciences | 21 Mar 1967 | 212 |
| 48 | A stored energy criterion for fatigue crack nucleation in polycrystals V.V.C. Wan, Duncan W. MacLachlan, Fionn P.E. Dunne · International Journal of Fatigue | 12 Jun 2014 | 211 |
| 49 | Capturing design rationale Rob H. Bracewell, Ken Wallace, Michael A. Moss et al. · Computer-Aided Design | Dec 2008 | 210 |
| 50 | Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature M.R. Bache, M. T. Cope, H. Davies et al. · International Journal of Fatigue | Jun 1997 | 206 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.