Science Explorer Back to mapMap

Most cited papers from Rudny Industrial Institute

What are the most cited papers from Rudny Industrial Institute?

The most cited paper from Rudny Industrial Institute is "Multi-Criteria Decision Analysis Methods Comparison" (Beate Zlaugotne, Lauma Žihare, Lauma Balode et al., 2020), with 123 citations. Next come "Study of the Properties of Antifriction Rings under Severe Plastic Deformation" (49) and "Natural Aging of Aluminum Alloy 2024 After Severe Plastic Deformation" (48).

Showing 50 of 60 papers. Every paper with more than 9 citations is listed.

Most cited papers, sortable by citations and release date
#Paper
1 Multi-Criteria Decision Analysis Methods Comparison Beate Zlaugotne, Lauma Žihare, Lauma Balode et al. · Environmental and Climate Technologies Open access 2020 123
2 Study of the Properties of Antifriction Rings under Severe Plastic Deformation Irina Evgenevna Volokitina, Alexandr Kolesnikov, Роман Сергеевич Федюк et al. · Materials Open access 31 Mar 2022 49
3 Natural Aging of Aluminum Alloy 2024 After Severe Plastic Deformation Irina Evgenevna Volokitina, A. Yu. Bychkov, Andrey Volokitin et al. · Metallography Microstructure and Analysis 24 Apr 2023 48
4 Modeling of Non-Ferrous Metallurgy Waste Disposal with the Production of Iron Silicides and Zinc Distillation Alexandr Kolesnikov, Роман Сергеевич Федюк, Mugahed Amran et al. · Materials Open access 30 Mar 2022 48
5 Structure and Mechanical Properties of Steel in the Process “Pressing–Drawing” Abdrakhman B. Naizabekov, Irina Evgenevna Volokitina, Andrey Volokitin et al. · Journal of Materials Engineering and Performance 24 Jan 2019 48
6 Modeling the power of renewable energy sources in the context of classical electricity system transformation Rafał Kasperowicz, Marcin Pinczyński, Asset Khabdullin · JOURNAL OF INTERNATIONAL STUDIES Open access Oct 2017 46
7 Study of changes in microstructure and metal interface Cu/Al during bimetallic construction wire straining Irina Evgenevna Volokitina, Bayan Sapargaliyeva, Aktolkyn Agabekova et al. · Case Studies in Construction Materials Open access 21 May 2023 45
8 The development and testing of a new method of qualitative analysis of the microstructure quality, for example of steel AISI 321 subjected to radial shear rolling Abdrakhman B. Naizabekov, Alexandr Arbuz, Sergey Nikolaevich Lezhnev et al. · Physica Scripta May 2019 44
9 Thermodynamic Simulation of Environmental and Population Protection by Utilization of Technogenic Tailings of Enrichment Olga Kolesnikova, Samal Syrlybekkyzy, Роман Сергеевич Федюк et al. · Materials Open access 8 Oct 2022 42
10 Thermophysical indicators of elaborated sandwich cladding constructions with heat-reflective coverings and air gaps Nurlan Zhangabay, Islambek Baidilla, Askhat Tagybayev et al. · Case Studies in Construction Materials Open access 21 May 2023 41
11 Achieving cryogenic wear resistance of MoS2 beyond conventional lubricity: An atomistic simulation study Zikun Tang, Longhui Zhu, Dongpeng Hua et al. · Tribology International 15 Apr 2026 40
12 Hardening of Bimetallic Wires from Secondary Materials Used in the Construction of Power Lines Irina Evgenevna Volokitina, Natalia Vasilyeva, Роман Сергеевич Федюк et al. · Materials Open access 2 Jun 2022 40
13 Assessment Method of Health Care Waste Generation in Latvia and Kazakhstan Jūlija Gušča, Silvija Nora Kalniņš, Dagnija Blumberga et al. · Energy Procedia Conference paperOpen access Jun 2015 39
14 Effect of the Initial Structural State of Cr–Mo High-Temperature Steel on Mechanical Properties after Equal-Channel Angular Pressing Abdrakhman NAYZABEKOV, Irina Evgenevna Volokitina · The Physics of Metals and Metallography Feb 2019 38
15 Development of a Thermomechanical Treatment Mode for Stainless-Steel Rings Irina Evgenevna Volokitina, Е. В. Сизякова, Роман Сергеевич Федюк et al. · Materials Open access 15 Jul 2022 37
16 Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Evgeniy Panin et al. · Journal of Materials Engineering and Performance 10 Dec 2018 37
17 Changes in Microstructure and Mechanical Properties of Steel-Copper Wire During Deformation Irina Evgenevna Volokitina, Andrey Volokitin · Metallurgist May 2023 36
18 Tribo-corrosion performances of high-entropy alloy coatings for biomedical applications: A review Zhan Wang, Yifan Shi, Yilin Liu et al. · Journal of Alloys and Compounds Jun 2026 35
19 Improving teaching in different disciplines of natural science and mathematics with innovative technologies Umitzhan Kossybayeva, Bagit Shaldykova, Dana M. Akhmanova et al. · Education and Information Technologies Open access 25 Feb 2022 31
20 Implementation of the Smart City Technology for Environmental Protection Management of Cities: The Experience of Russia and Kazakhstan Irina Turgel, Larissa Bozhko, Elizaveta Ulyanova et al. · Environmental and Climate Technologies Open access Nov 2019 29
21 Deep neural networks for speech enhancement and speech recognition: A systematic review Sureshkumar Natarajan, S. A. R. Al-Haddad, Faisul Arif Ahmad et al. · Ain Shams Engineering Journal ReviewOpen access May 2025 28
22 Martensitic Transformation in AISI-316 Austenitic Steel During Thermomechanical Processing Andrey Volokitin, Irina Evgenevna Volokitina, Evgeniy Panin · Metallography Microstructure and Analysis Aug 2022 25
23 Porous Fly Ash/Aluminosilicate Microspheres-Based Composites Containing Lightweight Granules Using Liquid Glass as Binder Olga Miryuk, Роман Сергеевич Федюк, Mugahed Amran · Polymers Open access 24 Aug 2022 25
24 Optimization of landfill Gas Use in Municipal Solid Waste Landfills in Latvia Elīna Dāce, Dagnija Blumberga, Ģirts Kuplais et al. · Energy Procedia Conference paperOpen access Jun 2015 25
25 Leading factors in the formation of innovative education environment Елена Гуличева, Evgeny Lisin, Марина Осипова et al. · JOURNAL OF INTERNATIONAL STUDIES Open access 10 Jun 2017 24
26 Thermomechanical treatment of steel using severe plastic deformation and cryogenic cooling Andrey Volokitin, Abdrakhman B. Naizabekov, Irina Evgenevna Volokitina et al. · Materials Letters 3 Aug 2021 20
27 Physico-Chemical Study of the Possibility of Utilization of Coal Ash by Processing as Secondary Raw Materials to Obtain a Composite Cement Clinker Bekkeldi Muratov, Alexandr Kolesnikov, Sh. K. Shapalov et al. · Journal of Composites Science Open access 6 Jun 2023 19
28 Demand response analysis methodology in district heating system Asset Khabdullin, Zauresh Khabdullina, Guldana Khabdullina et al. · Energy Procedia Conference paperOpen access Sep 2017 19
29 Foam Glass Crystalline Granular Material from a Polymineral Raw Mix Olga Miryuk, Роман Сергеевич Федюк, Mugahed Amran · Crystals Open access 24 Nov 2021 18
30 The effect of cross rolling on the microstructure of ferrous and non-ferrous metals and alloys Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Henryk Dyja et al. · University of Zagreb University Computing Centre (SRCE) Open access 2017 17
31 Energy Efficiency and Energy Management Nexus Dagnija Blumberga, Haralds Vīgants, Einārs Cilinskis et al. · Energy Procedia Conference paperOpen access Sep 2016 17
32 Graded Microstructure Preparation in Austenitic Stainless Steel during Radial-Shear Rolling Sergey Nikolaevich Lezhnev, Abdrakhman B. Naizabekov, Evgeniy Panin et al. · Metallurgist Mar 2021 16
33 Development scenarios for the interregional economic interaction in the context of economy clustering in the Republic of Kazakhstan Larissa Bozhko · Energy Procedia Conference paperOpen access Aug 2018 15
34 Mathematical Model of Synchronous Motors for Static Characteristics Power Loss Asset Khabdullin, Arman Khabdullin, Zauresh Khabdullina et al. · Energy Procedia Conference paperOpen access Sep 2016 15
35 Impact of Zones with Special Status on the Environment (Experience of Russia and Kazakhstan) Irina Turgel, Larissa Bozhko, Ekaterina Pracheva et al. · Environmental and Climate Technologies Open access Nov 2019 13
36 Cluster approach to organization of special economic zones in Russia and Kazakhstan Irina Turgel, Larisa G. Bozhko, E G Zinovyeva · R-Economy Open access 11 Jul 2019 13
37 The effect of radial-shear rolling on microstructure and mechanical properties of stainless austenitic steel AISI-321 Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Alexandr Arbuz et al. · MATEC Web of Conferences Conference paperOpen access 2018 13
38 Combined process “helical rolling-pressing” and its effect on the microstructure of ferrous and non-ferrous materials Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Alexandr Arbuz et al. · Metallurgical Research & Technology 2018 13
39 One-dimensional convective heating with a time-dependent heat-transfer coefficient Yu. S. Postol’nik · Journal of Engineering Physics and Thermophysics Feb 1970 13
40 Achieving cryogenic wear resistance in multi-principal element alloy via coherent precipitation and gradient nanostructuring Longhui Zhu, Yue Ren, Zikun Tang et al. · Acta Materialia 30 Jul 2026 12
41 Use of laser cladding for the synthesis of coatings from high-entropy alloys reinforced with ceramic particles Abdrakhman B. Naizabekov, Marina Nikolaevna Samodurova, Evgenii Bodrov et al. · Case Studies in Construction Materials Open access 5 Oct 2023 12
42 Experimental Study of Energy-Power Parameters of Billet Rolling of Compressor Blades of Aircraft Engines Valeriy Chigirinsky, Motor Sich JSC, 15 Motorostroiteley Ave., UA-69068 Zaporizhzhya, Ukraine, Yu. S. Kresanov et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII Open access 14 Aug 2023 12
43 Substantiation and development of innovative container technology for rock mass lifting from deep open pits Bolatkhan Khussan, Arstanbek Abdiev, М. Zh. Bitimbayev et al. · Mining of Mineral Deposits Open access 30 Dec 2022 12
44 State Support of Monotowns in Russia and Kazakhstan: Experience and Problems Irina Turgel, Larissa Bozhko, Liliya Leskova · Energy Procedia Conference paperOpen access Sep 2016 12
45 Additional effect on the deformation zone during plastic metal flow Valeriy Chigirinsky, Irina Evgenevna Volokitina · Engineering Solid Mechanics Open access 14 Dec 2023 11
46 Digital Technologies as a Factor in Reducing the Impact of Quarries on the Environment Mikhail Yu. Zarubin, Venera R. Zarubina, Kadyrgali Jamanbalin et al. · Environmental and Climate Technologies Open access 2021 11
47 Ecological Feasibility of Applying Technology in Recycling Garment and Knitwear Production Olga Kadnikova, Gulnara Altynbayeva, Sergey L. Kuzmin et al. · Environmental and Climate Technologies Open access Nov 2019 11
48 OBTAINING OF LONG-LENGTH RODS WITH ULTRAFINE-GRAINED STRUCTURE BY THE RADIAL-SHEAR ROLLING Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Alexandr Arbuz et al. · IOP Conference Series Materials Science and Engineering Conference paperOpen access 10 Dec 2018 11
49 Potential analysis of implementation of developed technology for processing of sewing and knitting fabrics Olga Kadnikova, Gulnara Altynbayeva, Arman Aidarkhanov et al. · Energy Procedia Conference paperOpen access Sep 2017 11
50 Computer Simulation of the Combined Process "Helical Rolling-Pressing" Abdrakhman B. Naizabekov, Sergey Nikolaevich Lezhnev, Alexandr Arbuz et al. · Key engineering materials Open access Oct 2016 11

Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.