Institution · SKF (Sweden)
Most cited papers from SKF (Sweden)
What are the most cited papers from SKF (Sweden)?
The most cited paper from SKF (Sweden) is "On the flexibility of agglomeration based physical space discontinuous Galerkin discretizations" (Francesco Andreasi Bassi, Lorenzo Botti, A. Colombo et al., 2011), with 274 citations. Next come "An integrated method for assessing climate-related risks and adaptation alternatives in urban areas" (148) and "Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement" (133).
Showing 50 of 60 papers. Every paper with more than 20 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | On the flexibility of agglomeration based physical space discontinuous Galerkin discretizations Francesco Andreasi Bassi, Lorenzo Botti, A. Colombo et al. · Journal of Computational Physics | 10 Sep 2011 | 274 |
| 2 | An integrated method for assessing climate-related risks and adaptation alternatives in urban areas Yvonne Andersson‐Sköld, Sofia Thorsson, David P. Rayner et al. · Climate Risk Management | 2015 | 148 |
| 3 | Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement Matti Rantatalo, Jan-Olov Aidanpää, Bo Göransson et al. · International Journal of Machine Tools and Manufacture | 9 Dec 2006 | 133 |
| 4 | Formation mechanisms of white layers induced by hard turning of AISI 52100 steel Seyed Hosseini, Uta Klement, Yiming Yao et al. · Acta Materialia | 25 Feb 2015 | 129 |
| 5 | Ultrasmooth Submicrometer Carbon Spheres as Lubricant Additives for Friction and Wear Reduction Abdullah A. Alazemi, Vinodkumar Etacheri, Arthur D. Dysart et al. · ACS Applied Materials & Interfaces | 17 Feb 2015 | 125 |
| 6 | Cutting temperatures during hard turning—Measurements and effects on white layer formation in AISI 52100 Seyed Hosseini, Tomáš Beňo, Uta Klement et al. · Journal of Materials Processing Technology | 4 Feb 2014 | 98 |
| 7 | A New Approach to Modeling Surface Defects in Bearing Dynamics Simulations Ankur Ashtekar, Farshid Sadeghi, Lars-Erik Stacke · Journal of Tribology | 12 Aug 2008 | 84 |
| 8 | Manufacturing actor’s LCA Birger Löfgren, Anne‐Marie Tillman, Björn Rinde · Journal of Cleaner Production | 29 Jul 2011 | 79 |
| 9 | The effect of cold ring rolling on the evolution of microstructure and texture in 100Cr6 steel K. Ryttberg, Maria Knutson Wedel, V. Recina et al. · Materials Science and Engineering A | 17 Dec 2009 | 75 |
| 10 | Relating manufacturing system configuration to life-cycle environmental performance: discrete-event simulation supplemented with LCA Birger Löfgren, Anne‐Marie Tillman · Journal of Cleaner Production | 25 Jul 2011 | 72 |
| 11 | A CFD investigation of lubricant flow in deep groove ball bearings Wyatt Peterson, Thomas E. Russell, Farshid Sadeghi et al. · Tribology International | 23 Oct 2020 | 70 |
| 12 | Load distribution in a taper roller bearing arrangement considering misalignment Staffan Andréason · Tribology | Jun 1973 | 67 |
| 13 | Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions Thore B. Lund · Journal of ASTM International | May 2010 | 65 |
| 14 | The fatigue limit of bearing steels – Part I: A pragmatic approach to predict very high cycle fatigue strength Junbiao Lai, Thore B. Lund, Karin Rydén et al. · International Journal of Fatigue | 10 Nov 2011 | 61 |
| 15 | Ice adhesion to rubber materials Lars-Olof Andersson, Carl-Gustaf Gölander, Sture Persson · Journal of Adhesion Science and Technology | 1994 | 61 |
| 16 | The increase in efficiency with size of research teams J. T. Wallmark, Sven Eckerstein, Birgitta Langered et al. · IEEE Transactions on Engineering Management | Aug 1973 | 61 |
| 17 | The fatigue limit of bearing steels – Part II: Characterization for life rating standards Antonio Gabelli, Junbiao Lai, Thore B. Lund et al. · International Journal of Fatigue | 27 Dec 2011 | 60 |
| 18 | Integrated Tribological Analysis within a Multi- physics Approach to System Dynamics Mircea Teodorescu, Sashi Balakrishnan, Homer Rahnejat · Tribology & interface engineering/Tribology and interface engineering | 2005 | 58 |
| 19 | Surface defects effects on bearing dynamics Ankur Ashtekar, Farshid Sadeghi, L-E Stacke · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | 2 Jun 2009 | 57 |
| 20 | Three Decades of Swedish Experience Demonstrates the Need for Integrated Long-Term Monitoring of Fish in Marine Coastal Areas Olof Sandström, Åke Larsson, Jan Andersson et al. · Water Quality Research Journal | Aug 2005 | 51 |
| 21 | Modelling of induction hardening in low alloy steels Martin Fisk, Lars‐Erik Lindgren, W. Datchary et al. · Finite Elements in Analysis and Design | 18 Mar 2018 | 49 |
| 22 | Measuring Film Thickness in Starved Grease-Lubricated Ball Bearings: An Improved Electrical Capacitance Method Pramod Shetty, R.J. de Meijer, Jude A. Osara et al. · Tribology Transactions | Jul 2022 | 47 |
| 23 | Influence of ring growth rate on damage development in hot ring rolling Chao Wang, H.J.M. Geijselaers, Edin Omerspahic et al. · Journal of Materials Processing Technology | 19 Aug 2015 | 47 |
| 24 | On the Reproducibility of Air Plasma Spray Process and Control of Particle State Vasudevan Srinivasan, Aniruddha Vaidya, Tilo Streibl et al. · Journal of Thermal Spray Technology | Dec 2006 | 46 |
| 25 | Optimal Clone Number for Seed Orchards with Tested Clones D. Lindgren, Finnvid Prescher · Silvae genetica/Silvae Genetica | Dec 2005 | 45 |
| 26 | Effect of Particulate Contamination in Grease-Lubricated Hybrid Rolling Bearings Lars Kahlman, Ian M. Hutchings · Tribology Transactions | 1999 | 45 |
| 27 | Influence of surface topography on friction, film breakdown and running-in in the mixed lubrication regime Piet M. Lugt, R. W. M. Severt, J Fogelströ et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | Jun 2001 | 44 |
| 28 | Investigation of the effect of a diamine-based friction modifier on micropitting and the properties of tribofilms in rolling-sliding contacts Siavash Soltanahmadi, Ardian Morina, Marcel C. P. van Eijk et al. · Journal of Physics D Applied Physics | 11 Nov 2016 | 43 |
| 29 | Characterization of the Surface Integrity Induced by Hard Turning of Bainitic and Martensitic AISI 52100 Steel Seyed Hosseini, K. Ryttberg, Jacek Kamiński et al. · Procedia CIRP | 2012 | 43 |
| 30 | Increased Performance of Hybrid Bearings with Silicon Nitride Balls G.T.Y. Wan, Alexander R. Gabelli, E. Ioannides · Tribology Transactions | 1997 | 42 |
| 31 | Investigation of main bearing operating conditions in a three-Point mount wind turbine drivetrain Yi Guo, Olle Bankeström, Roger Bergua et al. · Forschung im Ingenieurwesen | Apr 2021 | 40 |
| 32 | Growth characters and number of strobili in clonal seed orchards of Pinus sylvestris Nebi Bilir, Finnvid Prescher, Sezgin Ayan et al. · Euphytica | 10 Aug 2006 | 40 |
| 33 | Long-term development in a Baltic fish community exposed to bleached pulp mill effluent Olof Sandström, Erik Neuman · Aquatic Ecology | Jul 2003 | 40 |
| 34 | Challenges Building a Data Value Chain to Enable Data-Driven Decisions: A Predictive Maintenance Case in 5G-Enabled Manufacturing Magnus Åkerman, Camilla Lundgren, Maja Bärring et al. · Procedia Manufacturing | 2018 | 38 |
| 35 | Modified heller procedure to prevent postoperative reflux esophagitis in patients with achalasia J Jekler, J Lhotka · The American Journal of Surgery | Feb 1967 | 38 |
| 36 | Atomic-scale investigation of carbon atom migration in surface induced white layers in high-carbon medium chromium (AISI 52100) bearing steel Seyed Hosseini, Mattias Thuvander, Uta Klement et al. · Acta Materialia | 15 Mar 2017 | 37 |
| 37 | Mortality and Cancer Morbidity in Workers Exposed to Cutting Fluids Bengt Järvholm, Bengt Lavenius · Archives of Environmental Health An International Journal | Dec 1987 | 37 |
| 38 | Novel tertiary dry solid lubricant on steel surfaces reduces significant friction and wear under high load conditions Abdullah A. Alazemi, Arthur D. Dysart, Steven J. Shaffer et al. · Carbon | 11 Jul 2017 | 34 |
| 39 | Analysis of grease lubrication of a ball bearing using acoustic emission measurement J. Miettinen, Peter Andersson, V Wikströ · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology | Jun 2001 | 33 |
| 40 | Dissolution of Iron-chromium Carbides during White Layer Formation Induced by Hard Turning of AISI 52100 Steel Seyed Hosseini, Richard Dahlgren, K. Ryttberg et al. · Procedia CIRP | 2014 | 31 |
| 41 | Impact of oxidation on grease life in rolling bearings Piet M. Lugt, Mikael Holgerson, Fredrik Reinholdsson · Tribology International | 17 Jul 2023 | 30 |
| 42 | OMSimulator - Integrated FMI and TLM-based Co-simulation with Composite Model Editing and SSP Lennart Ochel, Robert Braun, Bernhard Thiele et al. · Linköping electronic conference proceedings | Feb 2019 | 30 |
| 43 | Typing ofPasteurella multocidafrom haemorrhagic septicaemia in Danish fallow deer(Dama dama) Bent Aalbæk, L. Eriksen, Richard B. Rimler et al. · Apmis | Mar 1999 | 30 |
| 44 | Dynamic Mapping of Rotary Lip Seal Lubricant Films by Fluorescent Image Processing Gerhard Poll, Alexander R. Gabelli, P. G. Binnington et al. · Fluid mechanics and its applications | 1992 | 30 |
| 45 | Application of computed X‐ray tomography scanning in the study of thermo‐oxidative degradation of thick‐walled filled natural rubber vulcanizates Håkan Lavebratt, Erik Östman, Sture Persson et al. · Journal of Applied Polymer Science | 5 Jan 1992 | 30 |
| 46 | 6 Rolling Element Bearings D.G. Hjertzen, R.A. Jarvis · Tribology series | 1983 | 29 |
| 47 | Variation in cone and seed characters in clonal seed orchards of Pinus sylvestris Nebi Bilir, Finnvid Prescher, D. Lindgren et al. · New Forests | 8 May 2008 | 28 |
| 48 | Crosslinking of polybutadiene rubber without any vulcanization agent Martin Bellander, Bengt Stenberg, Sture Persson · Polymer Engineering and Science | Aug 1998 | 27 |
| 49 | Coupled electromagnetic-thermal solution strategy for induction heating of ferromagnetic materials Martin Fisk, Matti Ristinmaa, Andreas Hultkrantz et al. · Applied Mathematical Modelling | 16 Jul 2022 | 26 |
| 50 | Introducing Design for Six Sigma at SKF Torben Hasenkamp, Annika Olme · International Journal of Six Sigma and Competitive Advantage | 2008 | 26 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.