Institution · Stresstech (Finland)
Most cited papers from Stresstech (Finland)
What are the most cited papers from Stresstech (Finland)?
The most cited paper from Stresstech (Finland) is "Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel" (Dhayanithi Senthilkumar, I. Rajendran, M. Pellizzari et al., 2010), with 147 citations. Next come "Effect of Shot Peening Parameters to Residual Stress Profiles and Barkhausen Noise" (50) and "Residual stress state in an induction hardened steel bar determined by synchrotron- and neutron diffraction compared to results from lab-XRD" (42).
Showing 27 of 27 papers. Every paper is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel Dhayanithi Senthilkumar, I. Rajendran, M. Pellizzari et al. · Journal of Materials Processing Technology | 5 Nov 2010 | 147 |
| 2 | Effect of Shot Peening Parameters to Residual Stress Profiles and Barkhausen Noise Aki Sorsa, Suvi Santa-aho, Jukka Wartiainen et al. · Journal of Nondestructive Evaluation | 22 Jan 2018 | 50 |
| 3 | Residual stress state in an induction hardened steel bar determined by synchrotron- and neutron diffraction compared to results from lab-XRD Jonas Holmberg, A. Steuwer, Albin Stormvinter et al. · Materials Science and Engineering A | 30 Apr 2016 | 42 |
| 4 | Residual Stresses in Welded Components Following Post-weld Treatment Methods Lasse Suominen, Mansoor Khurshid, Jari Parantainen · Procedia Engineering | 2013 | 41 |
| 5 | Barkhausen noise-magnetizing voltage sweep measurement in evaluation of residual stress in hardened components Suvi Santa-aho, Aki Sorsa, Merja Hakanen et al. · Measurement Science and Technology | 23 Jun 2014 | 21 |
| 6 | Magnetic domain wall dynamics studied by in-situ Lorentz microscopy with aid of custom-made Hall-effect sensor holder Mari Honkanen, Henri Lukinmaa, Sami Kaappa et al. · Ultramicroscopy | 26 Apr 2024 | 13 |
| 7 | Non-destructive Case Depth Determination by Means of Low-Frequency Barkhausen Noise Measurements Sebastian Send, Dominik Dapprich, James J. Thomas et al. · Journal of Nondestructive Evaluation | 24 Oct 2018 | 13 |
| 8 | Non-destructive analysis of the tungsten carbide grain size by means of two-dimensional X-ray diffraction Sebastian Send, Roope Lehto, Tero Mäkäläinen et al. · International Journal of Refractory Metals and Hard Materials | 29 Jan 2024 | 7 |
| 9 | Comparison of Residual Stress Measurements Using X-Ray Diffraction and PRISM - Electronic Speckle Pattern Interferometry and Hole-Drilling Theo J. Rickert, Robert M. Fix, Lasse Suominen · SAE technical papers on CD-ROM/SAE technical paper series | 16 Apr 2007 | 7 |
| 10 | Residual Stress Measurement of Shot-Peened Steel Rings by Barkhausen Noise, ESPI Hole-Drilling and X-Ray Diffraction Theo J. Rickert, James J. Thomas, Lasse Suominen · Advanced materials research | Aug 2014 | 7 |
| 11 | Case depth verification of hardened samples with Barkhausen noise sweeps Suvi Santa-aho, Merja Hakanen, Aki Sorsa et al. · AIP conference proceedings | 2014 | 7 |
| 12 | Round Robin Study on Residual Stresses Using X-Ray Diffraction for Shot-Peened Tool Steel Specimens Mikko Palosaari, Peter Andersson, Seyed Hosseini et al. · Materials research proceedings | 10 Sep 2018 | 5 |
| 13 | Surface Layer Characterization of Shot Peened Gear Specimens Suvi Santa-aho, Aki Sorsa, Jukka Wartiainen et al. · Materials Performance and Characterization | Apr 2018 | 4 |
| 14 | Analysis of Residual Stress on FSW AA 6061 Using Hole-Drilling with ESPI for HFMI Treated Condition Mohamed Ackiel Mohamed, Yupiter HP Manurung, Markus Laakkonen · Materials science forum | 20 Mar 2017 | 4 |
| 15 | Residual Stress Measurement of Ti-Metal Samples by Means of XRD with Ti and Cu Radiation Lasse Suominen, Theo J. Rickert, Sebastian Send · Materials research proceedings | 21 Dec 2016 | 4 |
| 16 | Modeling and Measurement of Residual Stresses along the Process Chain of Autofrettaged Components by Using FEA and Hole-Drilling Method with ESPI Horst Brünnet, Dirk Bähre, Theo J. Rickert et al. · Materials science forum | Sep 2013 | 4 |
| 17 | MYTHEN Detector – Perspectives in Residual Stress Measurements Dubravka Šišak Jung, Lasse Suominen, Jari Parantainen et al. · Advanced materials research | Aug 2014 | 4 |
| 18 | Analysis and determination of the stress field at the Olkiluoto site Bruno Figueiredo, Jonny Sjöberg, Jussi Mattila et al. · IOP Conference Series Earth and Environmental Science | 2023 | 3 |
| 19 | Minimum detection limits and applications of proton and helium induced X-ray emission using transition-edge sensor array Marko Käyhkö, Mikko R. J. Palosaari, Mikko Laitinen et al. · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms | 16 Mar 2017 | 3 |
| 20 | Methodology of Residual Stress Measurements for Rivet Joints Jerzy Kaniowski, Bartosz Korzeniewski, Merja Hakanen · Fatigue of Aircraft Structures | 2011 | 2 |
| 21 | Stress Measurements in Glass and Plastic by Optical Hole-Drilling Markus Laakkonen, Theo J. Rickert, Lasse Suominen · Materials science forum | Sep 2013 | 2 |
| 22 | Rolling Deformations and Residual Stresses of Large Circular Saw Body Bolesław Porankiewicz, Jari Parantainen, Karolina Ostrowska · Engineering | 2010 | 2 |
| 23 | SI-Traceability of XRD Residual Stress Data by Using Fe Kα Radiation Sebastian Send, Jonathan Mohan, Mikko R. J. Palosaari | 15 Oct 2025 | 0 |
| 24 | Magnetic behavior of steel studied by in-situ Lorentz microscopy, magnetic force microscopy and micromagnetic simulations Mari Honkanen, Suvi Santa-aho, Sami Kaappa et al. · BIO Web of Conferences | 2024 | 0 |
| 25 | Fast residual stress determination by means of two-dimensional x-ray diffraction using the sin 2 ψ-method Sebastian Send, Dominik Dapprich, Mikko R. J. Palosaari · HAL (Le Centre pour la Communication Scientifique Directe) | 27 Mar 2022 | 0 |
| 26 | The Attempt of New Approach to Evaluate Surface Integrity Jiří Malec, Filip Červinka, Dominik Blažíček et al. · Defect and diffusion forum/Diffusion and defect data, solid state data. Part A, Defect and diffusion forum | Jul 2016 | 0 |
| 27 | High Temperature Pipeline Design John G. Greenslade, J. F. Nixon, D. W. Dyck · 2004 International Pipeline Conference, Volumes 1, 2, and 3 | 2004 | 0 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.