Institution · United Technologies Research Center
Most cited papers from United Technologies Research Center
What are the most cited papers from United Technologies Research Center?
The most cited paper from United Technologies Research Center is "A unified framework for the study of anti-windup designs" (Mayuresh V. Kothare, Peter J. Campo, Manfred Morari et al., 1994), with 966 citations. Next come "Noise due to turbulent flow past a trailing edge" (944) and "Hardness measurement at penetration depths as small as 20 nm" (932).
Showing 50 of 62 papers. Every paper with more than 88 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | A unified framework for the study of anti-windup designs Mayuresh V. Kothare, Peter J. Campo, Manfred Morari et al. · Automatica | Dec 1994 | 966 |
| 2 | Noise due to turbulent flow past a trailing edge Roy K. Amiet · Journal of Sound and Vibration | Aug 1976 | 944 |
| 3 | Hardness measurement at penetration depths as small as 20 nm J. B. Pethicai, R. Hutchings, W. C. Oliver · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties | Apr 1983 | 932 |
| 4 | Dual Active Bridge-Based Battery Charger for Plug-in Hybrid Electric Vehicle With Charging Current Containing Low Frequency Ripple Lingxiao Lincoln Xue, Zhiyu Shen, Dushan Boroyevich et al. · IEEE Transactions on Power Electronics | 16 Mar 2015 | 420 |
| 5 | Refraction of sound by a shear layer Roy K. Amiet · Journal of Sound and Vibration | Jun 1978 | 395 |
| 6 | Three-Dimensional Flow Within a Turbine Cascade Passage Lee S. Langston, Minor Nice, Richard Hooper · Journal of Engineering for Power | 1977 | 377 |
| 7 | Empowering and engaging industrial workers with Operator 4.0 solutions Eija Kaasinen, Franziska Schmalfuß, Cemalettin Öztürk et al. · Computers & Industrial Engineering | 30 Jan 2019 | 354 |
| 8 | Reactive element-sulfur interaction and oxide scale adherence Arnold W. Funkenbusch, John George Smeggil, Norman S. Bornstein · Metallurgical Transactions A | Jun 1985 | 352 |
| 9 | Rhenium additions to a Ni-base superalloy: Effects on microstructure Anthony F. Giamei, Donald L. Anton · Metallurgical Transactions A | Nov 1985 | 344 |
| 10 | Energy efficient building environment control strategies using real-time occupancy measurements Varick L. Erickson, Yiqing Lin, Ankur U. Kamthe et al. | 3 Nov 2009 | 298 |
| 11 | Turbine Rotor-Stator Interaction Robert P. Dring, H. David Joslyn, Larry W. Hardin et al. · Journal of Engineering for Power | Oct 1982 | 296 |
| 12 | FallDeFi Sameera Palipana, David Rojas, Piyush Agrawal et al. · Proceedings of the ACM on Interactive Mobile Wearable and Ubiquitous Technologies | 8 Jan 2018 | 281 |
| 13 | A relationship between indigenous impurity elements and protective oxide scale adherence characteristics John George Smeggil, Arnold W. Funkenbusch, Norman S. Bornstein · Metallurgical Transactions A | Jun 1986 | 279 |
| 14 | Ignition delay characteristics of methane fuels LOUIS J. SPADACCINI, Meredith B. Colket · Progress in Energy and Combustion Science | 1994 | 279 |
| 15 | High frequency thin-airfoil theory for subsonic flow Roy K. Amiet · AIAA Journal | Aug 1976 | 232 |
| 16 | Mesh‐independent matrix cracking and delamination modeling in laminated composites Endel V. Iarve, Mark R. Gurvich, DAVID H. MOLLENHAUER et al. · International Journal for Numerical Methods in Engineering | 14 Apr 2011 | 218 |
| 17 | Development of an Experimental Database and Kinetic Models for Surrogate Jet Fuels Tim Edwards, Meredith B. Colket, Nick Cernansky et al. · 45th AIAA Aerospace Sciences Meeting and Exhibit | 8 Jan 2007 | 206 |
| 18 | Combustion diagnostics by laser Raman and fluorescence techniques Alan C. Eckbreth, Paul A. Bonczyk, J. F. Verdieck · Progress in Energy and Combustion Science | 1979 | 205 |
| 19 | A symmetric organic-based nonaqueous redox flow battery and its state of charge diagnostics by FTIR Wentao Duan, R.S. Vemuri, Jarrod David Milshtein et al. · Journal of Materials Chemistry A | 2016 | 199 |
| 20 | CARS temperature and species measurements in augmented jet engine exhausts Alan C. Eckbreth, Gregory M. Dobbs, John H. Stufflebeam et al. · Applied Optics | May 1984 | 199 |
| 21 | An Experimental Study of Endwall and Airfoil Surface Heat Transfer in a Large Scale Turbine Blade Cascade Riccardo Graziani, Michael F. Blair, J. R. Taylor et al. · Journal of Engineering for Power | Apr 1980 | 198 |
| 22 | A Decentralized Scalable Approach to Voltage Control of DC Islanded Microgrids Michele Tucci, Stefano Riverso, Juan C. Vásquez et al. · IEEE Transactions on Control Systems Technology | 25 Feb 2016 | 193 |
| 23 | Drilling Burr Formation in Titanium Alloy, Ti-6AI-4V David Alan Dornfeld, J.S. Kim, H. Dechow et al. · CIRP Annals | 1999 | 168 |
| 24 | Analysis of the creep behavior of silicon carbide whisker reinforced 2124 Al(T4) Vincent C. Nardone, James R. Strife · Metallurgical Transactions A | 1987 | 165 |
| 25 | Acoustic radiation and surface pressure characteristics of an airfoil due to incident turbulence Robert W. Paterson, Roy K. Amiet | 20 Jul 1976 | 163 |
| 26 | Influence of Free-Stream Turbulence on Turbulent Boundary Layer Heat Transfer and Mean Profile Development, Part I—Experimental Data Michael F. Blair · ASME Journal of Heat and Mass Transfer | Feb 1983 | 158 |
| 27 | Processing materials with lasers Edward M. Breinan, C. M. Banas, B. H. Kear · Physics Today | Nov 1976 | 146 |
| 28 | Alloy 718 at Pratt & Whitney: Historical Perspective and Future Challenges D.F. Paulonis, J.J. Schirra | 2001 | 145 |
| 29 | Effect of the incident surface pressure field on noise due to turbulent flow past a trailing edge Roy K. Amiet · Journal of Sound and Vibration | Mar 1978 | 144 |
| 30 | A Framework for Attack-Resilient Industrial Control Systems: Attack Detection and Controller Reconfiguration Kaveh Paridari, Niamh O’Mahony, Alie El‐Din Mady et al. · Proceedings of the IEEE | 4 Sep 2017 | 142 |
| 31 | Comparative environmental and human health evaluations of thermolysis and solvolysis recycling technologies of carbon fiber reinforced polymer waste Y.F. Khalil · Waste Management | 27 Mar 2018 | 139 |
| 32 | Effects of B, C, and Zr on the structure and properties of a P/M nickel base superalloy Thomas J. Garosshen, Thomas Tillman, G. P. McCarthy · Metallurgical Transactions A | 1987 | 138 |
| 33 | The importance of quadrupole sources in prediction of transonic tip speed propeller noise Donald B. Hanson, Martin R. Fink · Journal of Sound and Vibration | 1979 | 137 |
| 34 | Building energy and comfort management through occupant behaviour pattern detection based on a large-scale environmental sensor network Bing Dong, Khee Poh Lam · Journal of Building Performance Simulation | 27 Jul 2011 | 134 |
| 35 | Behavioral Modeling of a Switched Reluctance Generator for Aircraft Power Systems Virgilio Valdivia, Rebecca Todd, Frank J. Bryan et al. · IEEE Transactions on Industrial Electronics | 7 Aug 2013 | 134 |
| 36 | A Fundamental Criterion for the Application of Rotor Casing Treatment E. M. Greitzer, J. P. Nikkanen, Djaafer Haddad et al. · Journal of Fluids Engineering | Jun 1979 | 132 |
| 37 | Residual‐Stress Predictions in Polycrystalline Alumina Venkata R. Vedula, S. Jill Glass, David M. Saylor et al. · Journal of the American Ceramic Society | Dec 2001 | 126 |
| 38 | Turbofan Mixer Nozzle Flow Field—A Benchmark Experimental Study Robert W. Paterson · Journal of Engineering for Gas Turbines and Power | Jul 1984 | 121 |
| 39 | Influence of Free-Stream Turbulence on Turbulent Boundary Layer Heat Transfer and Mean Profile Development, Part II—Analysis of Results Michael F. Blair · ASME Journal of Heat and Mass Transfer | Feb 1983 | 119 |
| 40 | An Adaptive Control System for Three-Phase Photovoltaic Inverters Working in a Polluted and Variable Frequency Electric Grid Fran González-Espín, G. Garcerá, Iván Patrao et al. · IEEE Transactions on Power Electronics | 22 Mar 2012 | 118 |
| 41 | Noise Component Method for Airframe Noise Martin R. Fink · Journal of Aircraft | Oct 1979 | 111 |
| 42 | Endothermic Heat-Sink of Jet Fuels for Scramjet Cooling He Huang, LOUIS J. SPADACCINI, David R. Sobel | 7 Jul 2002 | 110 |
| 43 | On-Board Object Detection: Multicue, Multimodal, and Multiview Random Forest of Local Experts Alejandro González, David Vázquez, Antonio M. López et al. · IEEE Transactions on Cybernetics | 4 Aug 2016 | 109 |
| 44 | Integrated tool chain for model-based design of Cyber-Physical Systems: The INTO-CPS project Peter Gorm Larsen, John S. Fitzgerald, Jim Woodcock et al. | Apr 2016 | 109 |
| 45 | A New Implementation of the Mellin Transform and its Application to Radar Classification of Ships Philip E. Zwicke, Imre Kiss · IEEE Transactions on Pattern Analysis and Machine Intelligence | Mar 1983 | 109 |
| 46 | A review of planar magnetic techniques and technologies C. Quinn, Karl Rinne, Terence O’Donnell et al. | 13 Nov 2002 | 107 |
| 47 | Deep Multimodal Representation Learning from Temporal Data Xitong Yang, Palghat S. Ramesh, Radha Chitta et al. | Jul 2017 | 106 |
| 48 | Line-Independent Plug-and-Play Controllers for Voltage Stabilization in DC Microgrids Michele Tucci, Stefano Riverso, Giancarlo Ferrari‐Trecate · IEEE Transactions on Control Systems Technology | 26 May 2017 | 105 |
| 49 | The effects on fracture toughness of ductile-phase composition and morphology in Nb-Cr-Ti and Nb-Siin situ composites D. L. Davidson, Kwai S. Chan, Donald L. Anton · Metallurgical and Materials Transactions A | Oct 1996 | 105 |
| 50 | Influence of molybdenum on the creep properties of nickel-base superalloy single crystals Rebecca A. MacKay, M. V. Nathal, David Dwight Pearson · Metallurgical Transactions A | 1990 | 100 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.