Most cited papers from Universal Instruments (United States)
What are the most cited papers from Universal Instruments (United States)?
The most cited paper from Universal Instruments (United States) is "An atomic-resolution atomic-force microscope implemented using an optical lever" (S. Alexander, Louis Hellemans, Othmar Marti et al., 1989), with 642 citations. Next come "Percutaneous Initiation of Cardiopulmonary Bypass" (212) and "Growth of Sn and intermetallic compounds in Sn-Ag-Cu solder" (173).
Showing 50 of 60 papers. Every paper with more than 13 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | An atomic-resolution atomic-force microscope implemented using an optical lever S. Alexander, Louis Hellemans, Othmar Marti et al. · Journal of Applied Physics | 1989 | 642 |
| 2 | Percutaneous Initiation of Cardiopulmonary Bypass Steven J. Phillips, Bruce Ballentine, Dianne Slonine et al. · The Annals of Thoracic Surgery | Aug 1983 | 212 |
| 3 | Growth of Sn and intermetallic compounds in Sn-Ag-Cu solder Lawrence P. Lehman, S. N. Athavale, Travis Z. Fullem et al. · Journal of Electronic Materials | Dec 2004 | 173 |
| 4 | Effect of voids on the reliability of BGA/CSP solder joints Mohammad Yunus, Krishnaswami “Hari” Srihari, James M. Pitarresi et al. · Microelectronics Reliability | 16 Jul 2003 | 154 |
| 5 | A Sequential Method for Screening Experimental Variables Chou Hsiung Li · Journal of the American Statistical Association | Jun 1962 | 151 |
| 6 | The impact of psoriasis on health care costs and patient work loss Joseph F. Fowler, Mei Sheng Duh, Ludmila Rovba et al. · Journal of the American Academy of Dermatology | 17 Oct 2008 | 150 |
| 7 | The growth of intermetallic compounds at Sn-Ag-Cu solder/Cu and Sn-Ag-Cu solder/Ni interfaces and the associated evolution of the solder microstructure A. Zribi, Anthony C. Clark, Lubov Zavalij et al. · Journal of Electronic Materials | Sep 2001 | 122 |
| 8 | Recrystallization and Precipitate Coarsening in Pb-Free Solder Joints During Thermomechanical Fatigue Liang Yin, Luke A. Wentlent, Linlin Yang et al. · Journal of Electronic Materials | 28 Sep 2011 | 115 |
| 9 | On the root cause of Kirkendall voiding in Cu3Sn Liang Yin, Peter Børgesen · Journal of materials research/Pratt's guide to venture capital sources | 4 Feb 2011 | 105 |
| 10 | Thermal Fatigue Evaluation of Pb-Free Solder Joints: Results, Lessons Learned, and Future Trends Richard J. Coyle, Keith Sweatman, Babak Arfaei · JOM | 8 Sep 2015 | 100 |
| 11 | Improving Data Center Energy Efficiency With Advanced Thermal Management Timothy Chainer, Mark Schultz, Pritish R. Parida et al. · IEEE Transactions on Components Packaging and Manufacturing Technology | 13 Mar 2017 | 94 |
| 12 | Solder metallization interdiffusion in microelectronic interconnects A. Zribi, Richard R. Chromik, R. Presthus et al. · IEEE Transactions on Components and Packaging Technologies | Jun 2000 | 60 |
| 13 | Comparison of Modeling Techniques for the Vibration Analysis of Printed Circuit Cards James M. Pitarresi, Anthony A. Primavera · Journal of Electronic Packaging | Dec 1992 | 58 |
| 14 | Shear testing and failure mode analysis for evaluation of BGA ball attachment Robert Erich, Richard J. Coyle, George M. Wenger et al. | 20 Jan 2003 | 56 |
| 15 | Intermittent Fault Detection and Isolation System Bryan Steadman, Floyd Berghout, Nathan Olsen et al. | Sep 2008 | 54 |
| 16 | Solder joint reliability under realistic service conditions Peter Børgesen, Sa’d Hamasha, Mazin H. Obaidat et al. · Microelectronics Reliability | Sep 2013 | 45 |
| 17 | Reliability and failure mechanism of solder joints in thermal cycling tests Babak Arfaei, Sam Mahin-Shirazi, Shantanu Joshi et al. | May 2013 | 43 |
| 18 | Assessing the risk of “Kirkendall voiding” in Cu3Sn Peter Børgesen, Liang Yin, Pericles A. Kondos · Microelectronics Reliability | 25 Dec 2010 | 42 |
| 19 | Toward a Better Understanding of the Effect of Cu Electroplating Process Parameters on Cu3Sn Voiding Liang Yin, Fred Wafula, Nikolay G. Dimitrov et al. · Journal of Electronic Materials | 28 Sep 2011 | 41 |
| 20 | Measurement of Interfacial Fracture Toughness Under Combined Mechanical and Thermal Stresses J. Jiao, C. K. Gurumurthy, Edward J. Kramer et al. · Journal of Electronic Packaging | Dec 1998 | 40 |
| 21 | Effect of voids on the reliability of BGA/CSP solder joints M. A. Yunus, Anthony A. Primavera, Krishnaswami “Hari” Srihari et al. | 11 Nov 2002 | 39 |
| 22 | Levels-based leadership and hierarchical group decision optimization: A simulation Shelley D. Dionne, Peter J. Dionne · The Leadership Quarterly | 13 Mar 2008 | 35 |
| 23 | Microstructure and Damage Evolution in Sn-Ag-Cu Solder Joints Lawrence P. Lehman, Robert Kinyanjui, Junling Wang et al. | 28 Jul 2005 | 33 |
| 24 | Effects of varying amplitudes on the fatigue life of lead free solder joints Mazin H. Obaidat, Sa’d Hamasha, Younis Jaradat et al. | May 2013 | 31 |
| 25 | Impact of Key Deposition Parameters on the Voiding Sporadically Occurring in Solder Joints with Electroplated Copper Fred Wafula, Y. Liu, L. Yin et al. · Journal of The Electrochemical Society | 31 Dec 2009 | 31 |
| 26 | Vacancy properties in gold R.P. Sahu, Kailash Chandra Jain, Richard W. Siegel · Journal of Nuclear Materials | Feb 1978 | 30 |
| 27 | Influence of Poly(ethylene glycol) Degradation on Voiding Sporadically Occurring in Solder Joints with Electroplated Cu Fred Wafula, L. Yin, Peter Børgesen et al. · Journal of Electronic Materials | 16 Mar 2012 | 30 |
| 28 | Improving the thermomechanical behavior of lead free solder joints by controlling the microstructure Babak Arfaei, Luke A. Wentlent, Shantanu Joshi et al. | May 2012 | 29 |
| 29 | An analyzer for detecting intermittent faults in electronic devices Brent Sorensen, Gerard Kelly, A. Sajecki et al. | 17 Dec 2002 | 28 |
| 30 | Accelerated vibration reliability testing of electronic assemblies using sine dwell with resonance tracking Quang T. Su, James M. Pitarresi, Mohammad A. Gharaibeh et al. | May 2014 | 28 |
| 31 | Microfluidic two-phase cooling of a high power microprocessor part A: Design and fabrication Mark Schultz, Pritish R. Parida, Michael A. Gaynes et al. | May 2017 | 25 |
| 32 | Effect of the deposition parameters on the voiding propensity of solder joints with Cu electroplated in a Hull cell Fred Wafula, Y. Liu, L. Yin et al. · Journal of Applied Electrochemistry | 25 Feb 2011 | 25 |
| 33 | Acceleration of the growth of Cu3Sn voids in solder joints Peter Børgesen, Liang Yin, Pericles A. Kondos · Microelectronics Reliability | 24 Dec 2011 | 25 |
| 34 | A mechanistic model of damage evolution in lead free solder joints under combinations of vibration and thermal cycling with varying amplitudes Peter Børgesen, Luke A. Wentlent, Thaer M. Alghoul et al. · Microelectronics Reliability | 8 Mar 2019 | 20 |
| 35 | On the Assessment of the Life of SnAgCu Solder Joints in Cycling With Varying Amplitudes Linlin Yang, Liang Yin, Babak Arafei et al. · IEEE Transactions on Components Packaging and Manufacturing Technology | 30 Jan 2013 | 20 |
| 36 | Effects of assembly process variables on voiding at a thermal interface Muffadal Mukadam, Jeff Schake, Peter Børgesen et al. | 4 Oct 2004 | 20 |
| 37 | Observation of anomalous Josephson effect in nonequilibrium Andreev interferometers Daniel Margineda, Jill S. Claydon, Fatjon Qejvanaj et al. · Physical review. B./Physical review. B | 15 Mar 2023 | 19 |
| 38 | Effects of Amplitude Variations on Deformation and Damage Evolution in SnAgCu Solder in Isothermal Cycling Luke A. Wentlent, Thaer M. Alghoul, Christopher Greene et al. · Journal of Electronic Materials | 22 Feb 2018 | 19 |
| 39 | Effects of Cycling Parameters on the Thermal Fatigue Life of Mixed SnAgCu/SnPb Solder Joints Michael Meilunas, Peter Børgesen · Journal of Electronic Packaging | Jun 2011 | 19 |
| 40 | Effects of Thermal Cycling on Creep of SnAgCu Solder Joints Thaer M. Alghoul, Luke A. Wentlent, Rajesh Sharma Sivasubramony et al. · IEEE Transactions on Components Packaging and Manufacturing Technology | 4 Dec 2018 | 18 |
| 41 | Effects of Laser Selective Reflow on Solder Joint Microstructure and Reliability Luke A. Wentlent, Mohammed Genanu, Thaer M. Alghoul | May 2018 | 18 |
| 42 | Thermal model for embedded two-phase liquid cooled microprocessor Pritish R. Parida, Arvind Sridhar, Augusto J. Vega et al. | May 2017 | 18 |
| 43 | Three-Dimensional Image Reconstruction Procedure for Food Microstructure Evaluation Kaifeng Ding, Sundaram Gunasekaran · Artificial Intelligence Review | Feb 1998 | 18 |
| 44 | NiSi formation through a semipermeable membrane of amorphous Cr(Ni) George A. Rozgonyi, Ju‐Hyeon Lee, Dirk Knoesen et al. · Applied Physics Letters | 18 Feb 1991 | 17 |
| 45 | Microfluidic two-phase cooling of a high power microprocessor part B: Test and characterization Mark Schultz, Pritish R. Parida, Michael A. Gaynes et al. | May 2017 | 16 |
| 46 | Solder paste volume effects on assembly yield and reliability for bottom terminated components Sai Srinivas Sriperumbudur, Michael Meilunas, Martin K. Anselm · Soldering and Surface Mount Technology | 3 Apr 2017 | 16 |
| 47 | Indium thermal interface material microstructure as a function of thermal history and bonding metallization Peter McClure, Yujia Wang · Journal of Materials Science Materials in Electronics | 14 Sep 2022 | 15 |
| 48 | Diffusion Creep of Realistic SnAgCu Solder Joints at Times and Stresses of Relevance to Thermal Fatigue Thaer M. Alghoul, Luke A. Wentlent, Rajesh Sharma Sivasubramony et al. · IEEE Transactions on Components Packaging and Manufacturing Technology | 16 Jul 2019 | 15 |
| 49 | Aspects of the structural evolution of lead-free solder joints A. Zribi, Robert Kinyanjui, Peter Børgesen et al. · JOM | Jun 2002 | 15 |
| 50 | Effects of latent damage of recrystallization on lead free solder joints Ahmad Turki Mayyas, Awni Qasaimeh, Peter Børgesen et al. · Microelectronics Reliability | 7 Nov 2013 | 15 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.