Science Explorer Interactive view Map
Company · Florence · Italy

Cad Modelling Ergonomics (Italy)

cadmodellingfit.com/en/what-we-doROR OpenAlex
Research works
25
▼ 20% vs 2013–17
Citations
138
5.5 per fractional work
Top-10% rate
5.5%
record average 16.5%
Open access
21%
world 28%

Not ranked overall: Cad Modelling Ergonomics (Italy) is under the volume floor below which an excellence rate is noise. Not ranked is not the same as ranked last.

Field profile

Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.

Who are the top researchers at Cad Modelling Ergonomics (Italy)?

Ranked on the composite score, Leonardo De Franceschi lead among researchers whose main affiliation is Cad Modelling Ergonomics (Italy).

  1. 1 Leonardo De Franceschi Italy · #581,897 worldwide 0 citations · 20 works
All ranked researchers at Cad Modelling Ergonomics (Italy)

Which keywords describe research at Cad Modelling Ergonomics (Italy)?

By fractional works in all years, weighted toward what it does more of than the world: Heat Transfer, Large-Eddy Simulation, Separation Control, Film Cooling, Turbine, Laser Surface Texturing, Tribological Performance and Friction Factor.

▲ more of its work than of the world’s◆ about the world’s share▼ less than the world’s

Size is fractional works in all years in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 27 words are chosen for being large and distinctive. Each links to the topic it comes from most.

All 27 words, with their numbers
  1. Heat Transfer11▲ 88×6 topics
  2. Large-Eddy Simulation7▲ 122×4 topics
  3. Separation Control4▲ 500×2 topics
  4. Film Cooling4▲ 850×1 topic
  5. Turbine4▲ 850×1 topic
  6. Laser Surface Texturing3▲ 377×1 topic
  7. Tribological Performance3▲ 210×1 topic
  8. Friction Factor3▲ 302×1 topic
  9. Solar Air Heater3▲ 302×1 topic
  10. Turbulent Flows2▲ 71×2 topics
  11. Chemical Kinetics2▲ 77×2 topics
  12. Vortex Dynamics2▲ 52×2 topics
  13. Boundary Layer Transition2▲ 83×1 topic
  14. Particle Image Velocimetry2▲ 83×1 topic
  15. Control2▲ 48×1 topic
  16. Hydraulic Systems2▲ 108×1 topic
  17. Combustion Instabilities1▲ 77×2 topics
  18. Premixed Combustion1▲ 112×1 topic
  19. Turbulent Flames1▲ 112×1 topic
  20. Computer Vision Syndrome1▲ 159×1 topic
  21. Design Research1▲ 197×1 topic
  22. Gear Dynamics1▲ 142×1 topic
  23. Mesh Stiffness1▲ 142×1 topic
  24. Moisture Management1▲ 99×1 topic
  25. Musculoskeletal Symptoms1▲ 159×1 topic
  26. Thermal Properties1▲ 26×1 topic
  27. User Experience1▲ 69×1 topic

Which research topics does Cad Modelling Ergonomics (Italy) publish most on?

By volume in 2022–2025: Turbomachinery Performance and Optimization, Tribology and Lubrication Engineering, Combustion and flame dynamics and Advanced Combustion Engine Technologies.

Turbomachinery Performan…1Turbomachinery Performance and Optimization: 1 fractional worksTribology and Lubricatio…1Tribology and Lubrication Engineering: 1 fractional worksCombustion and flame dyn…0Combustion and flame dynamics: 0 fractional worksAdvanced Combustion Engine Technologies: 0 fractional worksCOVID-19 and healthcare impacts: 0 fractional worksInfection Control and Ventilation: 0 fractional worksRefrigeration and Air Conditioning Technologies: 0 fractional worksTechnical Engine Diagnostics and Monitoring: 0 fractional worksAdvanced Sensor Technologies Research: 0 fractional worksInfection Control in Healthcare: 0 fractional works
Aerospace EngineeringMechanical EngineeringComputational MechanicsFluid Flow and Transfer Processes5 others

Area is fractional works; colour is the subfield each topic belongs to.

  1. 1 Turbomachinery Performance and Optimization Aerospace Engineering 1 works
  2. 2 Tribology and Lubrication Engineering Mechanical Engineering 1 works
  3. 3 Combustion and flame dynamics Computational Mechanics 0 works
  4. 4 Advanced Combustion Engine Technologies Fluid Flow and Transfer Processes 0 works
  5. 5 COVID-19 and healthcare impacts Oncology 0 works
  6. 6 Infection Control and Ventilation Pulmonary and Respiratory Medicine 0 works
  7. 7 Refrigeration and Air Conditioning Technologies Mechanical Engineering 0 works
  8. 8 Technical Engine Diagnostics and Monitoring Automotive Engineering 0 works
  9. 9 Advanced Sensor Technologies Research Biomedical Engineering 0 works
  10. 10 Infection Control in Healthcare Infectious Diseases 0 works

How open and international is its research?

Against the world’s own shares — the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.

openly available21.2%not open78.8%

World: 28% of research is openly available.

with international co-authors9.6%domestic only90.4%

World: 19% is written across borders.

How has Cad Modelling Ergonomics (Italy)'s research output changed?

Output in 2018–2022 was 20% lower than in 2013–2017.

20152020
grewheldshrank

The same series as a ribbon — one cell per year, darker for more. The line above answers how much; this answers when.

Other research institutions in Florence

All research institutions in Florence

Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners are in the interactive view on the map.