Institution · Roketsan
Most cited papers from Roketsan
What are the most cited papers from Roketsan?
The most cited paper from Roketsan is "State-Dependent Riccati Equation (SDRE) Control: A Survey" (Tayfun Çimen, 2008), with 505 citations. Next come "Systematic and effective design of nonlinear feedback controllers via the state-dependent Riccati equation (SDRE) method" (336) and "Survey of State-Dependent Riccati Equation in Nonlinear Optimal Feedback Control Synthesis" (335).
Showing 50 of 60 papers. Every paper with more than 21 citations is listed.
| # | Paper | ||
|---|---|---|---|
| 1 | State-Dependent Riccati Equation (SDRE) Control: A Survey Tayfun Çimen · IFAC Proceedings Volumes | 2008 | 505 |
| 2 | Systematic and effective design of nonlinear feedback controllers via the state-dependent Riccati equation (SDRE) method Tayfun Çimen · Annual Reviews in Control | Apr 2010 | 336 |
| 3 | Survey of State-Dependent Riccati Equation in Nonlinear Optimal Feedback Control Synthesis Tayfun Çimen · Journal of Guidance Control and Dynamics | 20 Jun 2012 | 335 |
| 4 | Indirect Impact-Angle-Control Against Stationary Targets Using Biased Pure Proportional Navigation Koray Savaş ERER, Osman Merttopçuoglu · Journal of Guidance Control and Dynamics | Mar 2012 | 264 |
| 5 | Switched-Gain Guidance for Impact Angle Control Under Physical Constraints Raziye Tekin, Koray Savaş ERER · Journal of Guidance Control and Dynamics | 20 Oct 2014 | 163 |
| 6 | Polynomial Shaping of the Look Angle for Impact-Time Control Raziye Tekin, Koray Savaş ERER, Florian Holzapfel · Journal of Guidance Control and Dynamics | 5 May 2017 | 154 |
| 7 | Damage mode identification of open hole composite laminates based on acoustic emission and digital image correlation methods Emre Özaslan, Ali Yetgin, Bülent Acar et al. · Composite Structures | 5 Jul 2021 | 117 |
| 8 | Impact Time and Angle Control Based on Constrained Optimal Solutions Koray Savaş ERER, Raziye Tekin · Journal of Guidance Control and Dynamics | 5 Jul 2016 | 105 |
| 9 | Adaptive Impact Time Control Via Look-Angle Shaping Under Varying Velocity Raziye Tekin, Koray Savaş ERER, Florian Holzapfel · Journal of Guidance Control and Dynamics | 7 Aug 2017 | 103 |
| 10 | Impact Time Control with Generalized-Polynomial Range Formulation Raziye Tekin, Koray Savaş ERER, Florian Holzapfel · Journal of Guidance Control and Dynamics | 2 Jan 2018 | 90 |
| 11 | Control of Impact Time with Increased Robustness via Feedback Linearization Raziye Tekin, Koray Savaş ERER, Florian Holzapfel · Journal of Guidance Control and Dynamics | 20 Apr 2016 | 88 |
| 12 | Effect of hybrid carbon nanotube/short glass fiber reinforcement on the properties of polypropylene composites Nevin Gamze Karsli, Sertan Yeşil, Ayşe İpek Aytaç · Composites Part B Engineering | 16 Apr 2014 | 87 |
| 13 | Estimation of deterministic and stochastic IMU error parameters Derya Unsal, Keri̇m Demi̇rbaş | Apr 2012 | 81 |
| 14 | An improved quasi-zero stiffness vibration isolation system utilizing dry friction damping Ata Donmez, Ender Ciğeroğlu, Gokhan Osman Ozgen · Nonlinear Dynamics | 19 May 2020 | 74 |
| 15 | Impact Time and Angle Control Against Moving Targets with Look Angle Shaping Raziye Tekin, Koray Savaş ERER · Journal of Guidance Control and Dynamics | 31 Dec 2019 | 73 |
| 16 | Numerical Study of the Aerodynamic Effects of Septoplasty and Partial Lateral Turbinectomy Samet Özlügedik, Güneş Nakiboğlu, Cüneyt Sert et al. · The Laryngoscope | Feb 2008 | 71 |
| 17 | The effect of CNT-reinforced polyurethane foam cores to flexural properties of sandwich composites Cigdem Caglayan, İdris Gürkan, Sıla Güngör et al. · Composites Part A Applied Science and Manufacturing | 21 Sep 2018 | 69 |
| 18 | Hydrogen energy systems for underwater applications Berna Sezgin, Yılser G. Devrim, Tayfur Öztürk et al. · International Journal of Hydrogen Energy | 21 Feb 2022 | 67 |
| 19 | XoFTR: Cross-modal Feature Matching Transformer Önder Tuzcuoğlu, Aybora Köksal, Buğra Sofu et al. | 17 Jun 2024 | 64 |
| 20 | Towards a Multimodal Model of Cognitive Workload Through Synchronous Optical Brain Imaging and Eye Tracking Measures Erdinç İşbilir, Murat Perit Çakır, Cengiz Acartürk et al. · Frontiers in Human Neuroscience | 23 Oct 2019 | 63 |
| 21 | Workload smoothing in simple assembly line balancing Meral Azizoğlu, Sadullah İmat · Computers & Operations Research | 14 Aug 2017 | 61 |
| 22 | Improved combustion model of boron particles for ducted rocket combustion chambers Bora Kalpakli, Emir Bedig Acar, Abdullah Ulaş · Combustion and Flame | 6 Mar 2017 | 59 |
| 23 | Parallelized structural topology optimization and CFD coupling for design of aircraft wing structures Erdal Oktay, Hasan U. Akay, Osman Merttopçuoglu · Computers & Fluids | 21 May 2011 | 55 |
| 24 | CFD predictions of dynamic derivatives for missiles Erdal Oktay, H. U. Akay | 14 Jan 2002 | 54 |
| 25 | Experimental and Numerical Aerodynamic Analysis of a Passenger Car: Influence of the Blockage Ratio on Drag Coefficient Armagan Altinisik, Emre Kütükçeken, H. Umur · Journal of Fluids Engineering | 25 Mar 2015 | 54 |
| 26 | Pressure-dependent conduction behavior of various particles for conductive adhesive applications Erol Sancaktar, Nursel Dilsiz · Journal of Adhesion Science and Technology | 1999 | 51 |
| 27 | Look Angle Constrained Impact Angle Control Based on Proportional Navigation Koray Savaş ERER, Raziye Tekin, Mustafa Kemal Ozgoren | 2 Jan 2015 | 48 |
| 28 | Autolanding control system design with deep learning based fault estimation Batuhan Eroglu, Murat Şahin, Nazım Kemal Üre · Aerospace Science and Technology | 13 May 2020 | 46 |
| 29 | HyperE2VID: Improving Event-Based Video Reconstruction via Hypernetworks Burak Ercan, Onur Eker, Canberk Saglam et al. · IEEE Transactions on Image Processing | 2024 | 45 |
| 30 | An experimental and numerical investigation on ballistic performance of advanced composites Bulut Berk, Ramazan Karakuzu, Ahmet Kaan Toksoy · Journal of Composite Materials | 5 Feb 2017 | 45 |
| 31 | Reliability Assessment of Solid-Propellant Rocket Motors Under Storage and Transportation Loads Okan Deniz Yılmaz, Bayındır Kuran, Gokhan Osman Ozgen · Journal of Spacecraft and Rockets | Aug 2017 | 40 |
| 32 | Enhancing aerodynamic performance of a two-dimensional airfoil using plasma actuators Nesij ÜNAL, Yahya Öz, Elif Albina ÜNAL et al. · Aerospace Science and Technology | 16 Dec 2024 | 39 |
| 33 | Study of sol–gel processing for fabrication of low density alumina microspheres Nursel Dilsiz, G. Akovali · Materials Science and Engineering A | Jul 2002 | 37 |
| 34 | Flexural characterization of 3D prepreg/stitched carbon/epoxy/multiwalled carbon nanotube preforms and composites Kadir Bilişik, Nesrin Sahbaz Karaduman, Erdal Sapancı · Journal of Composite Materials | 13 Jul 2018 | 36 |
| 35 | Experimental determination of fracture toughness properties of nanostitched and nanoprepreg carbon/epoxy composites Kadir Bilişik, Erdal Sapancı · Engineering Fracture Mechanics | 20 Nov 2017 | 35 |
| 36 | Stress analysis and strength prediction of composite laminates with two interacting holes Emre Özaslan, Mehmet Ali Güler, Ali Yetgin et al. · Composite Structures | 13 Apr 2019 | 34 |
| 37 | Solving TSP by using combinatorial Bees algorithm with nearest neighbor method Murat Şahin · Neural Computing and Applications | 6 Oct 2022 | 33 |
| 38 | Influence of posterior pedicle screw fixation at L4–L5 level on biomechanics of the lumbar spine with and without fusion: a finite element method Emre Sengul, Ramazan Özmen, Mesut Emre Yaman et al. · BioMedical Engineering OnLine | 7 Oct 2021 | 32 |
| 39 | Understanding mechanical failure of graphite rocket nozzle throats under thermal stresses Barış Nigar, Serhan Dönmez, Demirkan Çöker et al. · Aerospace Science and Technology | 9 Oct 2021 | 31 |
| 40 | Short-beam shear of nanoprepreg/nanostitched three-dimensional carbon/epoxy multiwall carbon nanotube composites Kadir Bilişik, Nesrin Sahbaz Karaduman, Erdal Sapancı · Journal of Composite Materials | 15 Jul 2019 | 31 |
| 41 | Twinning activities in high-Mn austenitic steels under high-velocity compressive loading Berkay Gumus, Burak Bal, Gregory Gerstein et al. · Materials Science and Engineering A | 12 Sep 2015 | 30 |
| 42 | Control of Impact Angle Using Biased Proportional Navigation Koray Savaş ERER, Mustafa Kemal Ozgoren · AIAA Guidance, Navigation, and Control (GNC) Conference | 15 Aug 2013 | 29 |
| 43 | Evaluation of Fuel Additives for Hybrid Rockets and SFRJ Systems Arif M. Karabeyoglu, Uğur Arkun · 50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference | 25 Jul 2014 | 29 |
| 44 | Investigation of effects of manufacturing defects on bursting behavior of composite pressure vessels with various stress ratios Emre Özaslan, K. Yurdakul, C. Talebi · International Journal of Pressure Vessels and Piping | 10 May 2022 | 28 |
| 45 | Thickness-dependent conduction behavior of various particles for conductive adhesive applications Erol Sancaktar, Nursel Dilsiz · Journal of Adhesion Science and Technology | 1999 | 27 |
| 46 | Topology optimization of 2.5D parts using the SIMP method with a variable thickness approach Volkan Kandemir, Oğuz Doǧan, Ulaş Yaman · Procedia Manufacturing | 2018 | 27 |
| 47 | Utilization of Menteş iron ore as oxygen carrier in Chemical-Looping Combustion Nesibe Dilmaç, Ömer Faruk Dilmaç, Esra Yardımcı · Energy | 24 Jul 2017 | 27 |
| 48 | A Generic Approach to Missile Autopilot Design using State-Dependent Nonlinear Control Tayfun ÇLimen · IFAC Proceedings Volumes | 2011 | 27 |
| 49 | Flexural behavior of 3D para -aramid/phenolic/nano (MWCNT) composites Kadir Bilişik, Gülhan Erdoğan, Erdal Sapancı · RSC Advances | 2018 | 26 |
| 50 | Production of TiB2 by SHS and HCl leaching at different temperatures: Characterization and investigation of sintering behavior by SPS Meltem İpekçi, Selçuk Acar, Mustafa Elmadağlı et al. · Ceramics International | 29 Oct 2016 | 26 |
Citations are OpenAlex's own counts, from its 2026-09-23 snapshot, so the ranking can differ from Google Scholar or Web of Science. A paper is listed for an institution when any of its authors gave it as an affiliation; retracted papers and papers whose citation count cannot be traced to citing works are left out, and a preprint and the article it became are shown once. Release dates are OpenAlex's: where a source gave only a month or a year, that is what is shown. How the lists are chosen.