- Research works
- 20 ▲ 166% vs 2013–17
- Citations
- 316 15.5 per fractional work
- Top-10% rate
- 4.9% record average 16.5%
- Open access
- 42% world 28%
Not ranked overall: ScanArc Plasma Technologies (Sweden) is under the volume floor below which an excellence rate is noise. Not ranked is not the same as ranked last.
Field profile
Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.
Which keywords describe research at ScanArc Plasma Technologies (Sweden)?
By fractional works in all years, weighted toward what it does more of than the world: Microstructure, Mechanical Properties, Metallurgy, Databases, Thermochemical, Cryogenic Treatment, Wear Resistance and Microstructural Evolution.
- Sustainability
- Semiconductor Industry
- Infrared
- Hot Deformation
- Energy Efficiency
- Microstructural Evolution
- Cryogenic Treatment
- Databases
- Mechanical Properties
- Microstructure
- Metallurgy
- Thermochemical
- Wear Resistance
- Constitutive Modeling
- Dynamic Recrystallization
- Machine Learning
- Plasma Etching
- Small Target
Size is fractional works in all years in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 18 words are chosen for being large and distinctive. Each links to the topic it comes from most.
All 18 words, with their numbers
- Microstructure4▲ 38×7 topics
- Mechanical Properties4▲ 19×7 topics
- Metallurgy2▲ 163×2 topics
- Databases2▲ 235×1 topic
- Thermochemical2▲ 235×1 topic
- Cryogenic Treatment2▲ 237×1 topic
- Wear Resistance2▲ 194×1 topic
- Microstructural Evolution2▲ 49×3 topics
- Constitutive Modeling1▲ 78×2 topics
- Energy Efficiency1▲ 8.3×2 topics
- Dynamic Recrystallization1▲ 92×1 topic
- Hot Deformation1▲ 92×1 topic
- Machine Learning1▲ 2.4×4 topics
- Infrared1▲ 163×1 topic
- Plasma Etching1▲ 108×1 topic
- Semiconductor Industry1▲ 108×1 topic
- Small Target1▲ 163×1 topic
- Sustainability1▲ 2.8×2 topics
Which research topics does ScanArc Plasma Technologies (Sweden) publish most on?
By volume in 2022–2025: Metal Alloys Wear and Properties, Advanced Materials Characterization Techniques, Microstructure and Mechanical Properties of Steels and Mechanical stress and fatigue analysis.
Area is fractional works; colour is the subfield each topic belongs to.
- 1 Metal Alloys Wear and Properties Materials Chemistry 0 works
- 2 Advanced Materials Characterization Techniques Biomedical Engineering 0 works
- 3 Microstructure and Mechanical Properties of Steels Mechanical Engineering 0 works
- 4 Mechanical stress and fatigue analysis Mechanics of Materials 0 works
- 5 Advanced materials and composites Mechanical Engineering 0 works
- 6 Intermetallics and Advanced Alloy Properties Mechanical Engineering 0 works
- 7 Metallurgical Processes and Thermodynamics Mechanical Engineering 0 works
- 8 Hydrogen embrittlement and corrosion behaviors in metals Metals and Alloys 0 works
- 9 Corrosion Behavior and Inhibition Materials Chemistry 0 works
- 10 Non-Destructive Testing Techniques Mechanical Engineering 0 works
How open and international is its research?
Against the world’s own shares — the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.
World: 28% of research is openly available.
World: 19% is written across borders.
How has ScanArc Plasma Technologies (Sweden)'s research output changed?
Output in 2018–2022 was 166% higher than in 2013–2017.
The same series as a ribbon — one cell per year, darker for more. The line above answers how much; this answers when.
Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners are in the interactive view on the map.