ArcelorMittal (France)
In research, ArcelorMittal (France) stands highest in Physical Sciences (#9,618 of 21,541 worldwide) and Engineering (#8,477 of 11,412 worldwide), over all time. Relative to its size it is most specialised in Engineering — Engineering is 4.7× its share of world research.
- World rank, all time
- #16,864 of 42,892
- Rank in France
- #1,094 of 2,321
- Research works
- 316 ▼ 17% vs 2013–17
- Citations
- 7.2k 22.7 per fractional work
- Top-10% rate
- 7.8% record average 16.5%
- Open access
- 33% world 28%
What is ArcelorMittal (France) known for in research?
The fields where it stands highest, over all time, ranked among every institution above the floor in each field.
| Field | World rank | Where that sits | Top-10% rate | Works |
|---|---|---|---|---|
| Physical SciencesDomain | #9,618 of 21,541 | 19.7% | 305 | |
| EngineeringField | #8,477 of 11,412 | 19.2% | 203 |
Each strip is that field’s whole ranked pool, with the notch where ArcelorMittal (France) sits in it, in the colour of the band that rank falls in. The track under the rate is the rate itself: it carries no world mark, because the world rate differs by field (from about 6% to 21% in this record).
What does ArcelorMittal (France) specialise in?
Where its research is concentrated relative to its size: Engineering takes 4.7× the share of its output that it takes of world research.
- EngineeringField · 33.3 works4.7×
Location quotient, a volume reading rather than an impact one. It surfaces small, lopsided specialities.
Field profile
Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.
Rings at 0.5×, 1× and 2×. Widest outward: Engineering, 4.7×. Every wedge is a field page.
- Engineering 4.7×
- Materials Science 4.6×
- Chemical Engineering 3.9×
- Decision Sciences 0.9×
- Mathematics 0.9×
- Physics and Astronomy 0.9×
- Environmental Science 0.5×
- Energy 0.3×
- Chemistry 0.3×
- Earth and Planetary Sciences 0.3×
- Computer Science 0.2×
- Business, Management and Accounting 0.2×
- Psychology 0.1×
- Arts and Humanities 0.1×
- Social Sciences 0.1×
- Health Professions 0.0×
- Medicine 0.0×
Who are the top researchers at ArcelorMittal (France)?
Ranked on the composite score, Colin Scott, Jean‐Pierre Birat and Nicolas Legrand lead among researchers whose main affiliation is ArcelorMittal (France).
- 1 Colin Scott France · #138,920 worldwide 449 citations · 20 works
- 2 Jean‐Pierre Birat France · #264,298 worldwide 109 citations · 36 works
- 3 Nicolas Legrand France · #350,553 worldwide 52 citations · 25 works
- 4 Frédéric Bonnet France · #600,617 worldwide 34 citations · 32 works
Which keywords describe research at ArcelorMittal (France)?
By fractional works in 2022–2025, weighted toward what it does more of than the world: Microstructure, Mechanical Properties, Grain Refinement, High-Strength Steels, Martensite Transformation, Microstructural Evolution, Artificial Neural Networks and Grain Boundary Engineering.
- Material Characterization
- Oxidation Mechanism
- Finite Element Analysis
- Defect Detection
- Process Optimization
- Feature Extraction
- Fracture Toughness Testing
- Vibration Analysis
- Wear Resistance
- Sheet Metal Forming
- Ductile Fracture
- Passive Films
- Hot Deformation
- Constitutive Modeling
- Metallurgy
- Corrosion Behavior
- Grain Boundary Engineering
- Microstructural Evolution
- High-Strength Steels
- Mechanical Properties
- Microstructure
- Grain Refinement
- Martensite Transformation
- Artificial Neural Networks
- Hydrogen Embrittlement
- Energy Efficiency
- Pitting Corrosion
- Dynamic Recrystallization
- Numerical Simulation
- Stainless Steels
- Heat Transfer
- Cryogenic Treatment
- Nonlinear Dynamics
- Fatigue Crack Closure
- Databases
- Fluid-Structure Interaction
- Thermochemical
- Dynamic Response
- Iron Oxides
- Reduction Kinetics
Size is fractional works in 2022–2025 in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 40 words are chosen for being large and distinctive. Each links to the topic it comes from most.
All 40 words, with their numbers
- Microstructure8▲ 32×12 topics
- Mechanical Properties7▲ 15×16 topics
- Grain Refinement5▲ 88×4 topics
- High-Strength Steels4▲ 243×1 topic
- Martensite Transformation4▲ 243×1 topic
- Microstructural Evolution3▲ 40×4 topics
- Artificial Neural Networks2▲ 11×3 topics
- Grain Boundary Engineering2▲ 83×2 topics
- Hydrogen Embrittlement2▲ 61×3 topics
- Corrosion Behavior2▲ 59×2 topics
- Energy Efficiency2▲ 5.1×4 topics
- Metallurgy2▲ 81×2 topics
- Pitting Corrosion2▲ 97×2 topics
- Constitutive Modeling2▲ 68×2 topics
- Dynamic Recrystallization2▲ 109×1 topic
- Hot Deformation2▲ 109×1 topic
- Numerical Simulation2▲ 14×5 topics
- Passive Films2▲ 127×1 topic
- Stainless Steels2▲ 127×1 topic
- Ductile Fracture2▲ 142×1 topic
- Heat Transfer2▲ 7.6×4 topics
- Sheet Metal Forming2▲ 142×1 topic
- Cryogenic Treatment2▲ 122×1 topic
- Wear Resistance2▲ 93×1 topic
- Nonlinear Dynamics2▲ 14×2 topics
- Vibration Analysis2▲ 12×4 topics
- Fatigue Crack Closure1▲ 100×1 topic
- Fracture Toughness Testing1▲ 100×1 topic
- Databases1▲ 93×1 topic
- Feature Extraction1▲ 6.2×2 topics
- Fluid-Structure Interaction1▲ 19×3 topics
- Process Optimization1▲ 40×2 topics
- Thermochemical1▲ 93×1 topic
- Defect Detection1▲ 20×2 topics
- Dynamic Response1▲ 49×2 topics
- Finite Element Analysis1▲ 11×4 topics
- Iron Oxides1▲ 143×1 topic
- Oxidation Mechanism1▲ 32×2 topics
- Reduction Kinetics1▲ 143×1 topic
- Material Characterization1▲ 20×2 topics
Which research topics does ArcelorMittal (France) publish most on?
By volume in 2022–2025: Microstructure and Mechanical Properties of Steels, Metallurgy and Material Forming, Hydrogen embrittlement and corrosion behaviors in metals and Metal Forming Simulation Techniques.
Area is fractional works; colour is the subfield each topic belongs to.
- 1 Microstructure and Mechanical Properties of Steels Mechanical Engineering 4 works
- 2 Metallurgy and Material Forming Mechanics of Materials 2 works
- 3 Hydrogen embrittlement and corrosion behaviors in metals Metals and Alloys 2 works
- 4 Metal Forming Simulation Techniques Mechanical Engineering 2 works
- 5 Metal Alloys Wear and Properties Materials Chemistry 2 works
- 6 Fatigue and fracture mechanics Mechanics of Materials 1 works
- 7 Metallurgical Processes and Thermodynamics Mechanical Engineering 1 works
- 8 Iron and Steelmaking Processes Mechanical Engineering 1 works
- 9 Vibration and Dynamic Analysis Control and Systems Engineering 1 works
- 10 Non-Destructive Testing Techniques Mechanical Engineering 1 works
How open and international is its research?
Against the world’s own shares — the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.
World: 28% of research is openly available.
World: 19% is written across borders.
How has ArcelorMittal (France)'s research output changed?
Output in 2018–2022 was 17% lower than in 2013–2017.
The same series as a ribbon — one cell per year, darker for more. The line above answers how much; this answers when.
Other research institutions in Montataire
Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners are in the interactive view on the map.