National Metrology Center
In research, National Metrology Center stands highest in Physical Sciences (#16,117 of 17,446 worldwide), over all time.
- World rank, all time
- #33,466 of 34,923
- Rank in ??
- #567 of 615
- Research works
- 166 ▼ 49% vs 2018-21
- Citations
- 947 5.7 per fractional work
- Top-10% rate
- 2.4% all institutions 10.0%
- vs its own fields
- 0.83× 1.00× is exactly expected
- Open access
- 28% world 40%
- International
- 32% world 18%
What is National Metrology Center known for in research?
The fields where it stands highest, over all time, ranked among every institution above the floor in each field.
| Field | World rank | Where that sits | Top-10% rate | Works |
|---|---|---|---|---|
| Physical SciencesDomain | #16,117 of 17,446 | 2.8% | 125 |
Each strip is that field's whole ranked pool, with the notch where National Metrology Center sits in it, in the colour of the band that rank falls in. The track under the rate is the rate itself: it carries no average mark, because the average differs by field (from about 6% in Dentistry to 21% in Economics).
Which fields of science does National Metrology Center work in?
In all years, 76% of research at National Metrology Center is in Physical Sciences, 14% in Social Sciences. Its largest fields are Engineering (39%), Physics and Astronomy (14%), Decision Sciences (11%). It does 1.8× the world's share of Physical Sciences.
Each ring splits the one inside it: the four domains of science, their fields, their subfields. Size is fractional works in all years. Every slice is a page; the interactive view zooms down to single topics and colours each by how much more of it this institution does than the world.
Its 4 domains and 24 fields, with their numbers
- Physical Sciences12575.6%
- Engineering6539.1%
- Physics and Astronomy2314.1%
- Computer Science137.9%
- Chemistry74.4%
- Materials Science53.1%
- Earth and Planetary Sciences42.3%
- Environmental Science31.8%
- Energy21.5%
- Chemical Engineering21.1%
- Mathematics10.5%
- Social Sciences2314.2%
- Life Sciences116.5%
- Health Sciences63.7%
- Medicine32.1%
- Health Professions21.5%
- Dentistry00.2%
- Nursing00.0%
Field profile
Location quotient across every field it publishes in: outside the ring is more than an institution of this size would be expected to publish, inside it is less.
Rings at 0.5×, 1× and 2×. Widest outward: Decision Sciences, 6.7×. Every wedge is a field page.
All 19 fields, with their numbers
- Decision Sciences6.68×1 works
- Chemical Engineering4.23×0 works
- Physics and Astronomy3.99×2 works
- Energy3.56×1 works
- Earth and Planetary Sciences3.13×1 works
- Engineering2.72×7 works
- Mathematics2.51×0 works
- Materials Science1.49×1 works
- Computer Science1.40×2 works
- Arts and Humanities1.36×1 works
- Neuroscience1.21×0 works
- Chemistry1.09×0 works
- Nursing0.80×0 works
- Agricultural and Biological Sciences0.52×0 works
- Psychology0.32×0 works
- Biochemistry, Genetics and Molecular Biology0.18×0 works
- Environmental Science0.13×0 works
- Medicine0.10×0 works
- Health Professions0.05×0 works
- Decision Sciences 6.7×
- Chemical Engineering 4.2×
- Physics and Astronomy 4.0×
- Energy 3.6×
- Earth and Planetary Sciences 3.1×
- Engineering 2.7×
- Mathematics 2.5×
- Materials Science 1.5×
- Computer Science 1.4×
- Arts and Humanities 1.4×
- Neuroscience 1.2×
- Chemistry 1.1×
- Nursing 0.8×
- Agricultural and Biological Sciences 0.5×
- Psychology 0.3×
- Biochemistry, Genetics and Molecular Biology 0.2×
- Environmental Science 0.1×
- Medicine 0.1×
- Health Professions 0.1×
Who are the top researchers at National Metrology Center?
Ranked on the quality score, Melina Pérez Urquiza, Israel García-Ruiz and Yoshito Mitani lead among researchers whose main affiliation is National Metrology Center.
- 1 Melina Pérez Urquiza #4,398,461 worldwide 114 citations · 17 works
- 2 Israel García-Ruiz #4,500,395 worldwide 89 citations · 16 works
- 3 Yoshito Mitani #4,653,251 worldwide 33 citations · 15 works
- 4 Edgar Méndez-Lango #4,887,292 worldwide 152 citations · 25 works
- 5 Roberto Arias #5,132,930 worldwide 44 citations · 20 works
- 6 Daniel Cardenas-Garcia #5,240,982 worldwide 73 citations · 19 works
- 7 Hugo Gasca-Aragon #5,241,534 worldwide 48 citations · 32 works
- 8 Eduardo de Carlos-Lopez #5,245,734 worldwide 41 citations · 15 works
- 9 Octavio Icasio-Hernández #5,637,969 worldwide 160 citations · 26 works
- 10 Luis Omar Becerra #6,415,766 worldwide 90 citations · 46 works
Which keywords describe research at National Metrology Center?
By fractional works in all years, weighted toward what it does more of than the world: Quality Assurance, Measurement Uncertainty, Redefinition of SI Units, Microfabrication, Artificial Neural Networks, Atomic Clocks, Optical Clocks and Ceramic Materials.
- Medical Equipment
- Non-Destructive Testing
- Fringe Projection
- Camera Calibration
- Artificial Neural Network
- Dimensional Metrology
- Magnetic Resonance Imaging
- Structured Light
- Biosensing
- Resonators
- Microwave
- Frequency Estimation
- Digital Signal Processing
- On-Orbit Performance
- IEEE 1451
- Neural Networks
- Ceramic Materials
- Atomic Clocks
- Microfabrication
- Measurement Uncertainty
- Quality Assurance
- Redefinition of SI Units
- Artificial Neural Networks
- Optical Clocks
- High Temperature Sensors
- Thin Film Thermocouples
- Smart Sensors
- Radiometric Calibration
- Fourier Coefficients
- Machine Learning
- Sensors
- Predictive Maintenance
- Machine Tools
- Atomic Magnetometer
- Metamaterial
- Error Compensation
- Characterization
- Dielectric
- Microfluidic
- Maintenance
Size is fractional works in all years in the topics tagged with each word; colour is the word's share of this institution's work against its share of the world's. The 40 words are chosen for being large and distinctive. Each links to the topic it comes from most.
All 40 words, with their numbers
- Quality Assurance18▲ 55×2 topics
- Measurement Uncertainty17▲ 457×1 topic
- Redefinition of SI Units17▲ 457×1 topic
- Microfabrication9▲ 76×3 topics
- Artificial Neural Networks8▲ 11×4 topics
- Atomic Clocks8▲ 402×1 topic
- Optical Clocks8▲ 402×1 topic
- Ceramic Materials8▲ 44×3 topics
- High Temperature Sensors8▲ 234×1 topic
- Neural Networks8▲ 4.3×6 topics
- Thin Film Thermocouples8▲ 234×1 topic
- IEEE 14517▲ 99×1 topic
- Smart Sensors7▲ 50×1 topic
- On-Orbit Performance6▲ 161×1 topic
- Radiometric Calibration6▲ 161×1 topic
- Digital Signal Processing6▲ 48×2 topics
- Fourier Coefficients6▲ 315×1 topic
- Frequency Estimation6▲ 315×1 topic
- Machine Learning5▲ 1.46×13 topics
- Microwave4▲ 47×2 topics
- Sensors4▲ 16×3 topics
- Resonators4▲ 30×2 topics
- Predictive Maintenance3▲ 26×3 topics
- Biosensing3▲ 16×3 topics
- Machine Tools3▲ 22×2 topics
- Structured Light3▲ 29×2 topics
- Atomic Magnetometer3▲ 33×1 topic
- Magnetic Resonance Imaging3▲ 4.5×1 topic
- Metamaterial3▲ 21×2 topics
- Dimensional Metrology3▲ 47×1 topic
- Error Compensation3▲ 47×1 topic
- Artificial Neural Network2▲ 14×3 topics
- Characterization2▲ 9.7×2 topics
- Camera Calibration2▲ 34×1 topic
- Dielectric2▲ 38×1 topic
- Fringe Projection2▲ 34×1 topic
- Microfluidic2▲ 104×1 topic
- Non-Destructive Testing2▲ 12×2 topics
- Maintenance2▲ 18×1 topic
- Medical Equipment2▲ 49×1 topic
Which research topics does National Metrology Center publish most on?
By volume in 2022-now: Scientific Measurement and Uncertainty Evaluation, Advanced Measurement and Metrology Techniques, Digital and Traditional Archives Management and Research Data Management Practices.
Area is fractional works; colour is the subfield each topic belongs to.
- 1 Scientific Measurement and Uncertainty Evaluation Statistics, Probability and Uncertainty 1 works
- 2 Advanced Measurement and Metrology Techniques Mechanical Engineering 1 works
- 3 Digital and Traditional Archives Management Conservation 1 works
- 4 Research Data Management Practices Information Systems 1 works
- 5 Electron and X-Ray Spectroscopy Techniques Surfaces, Coatings and Films 1 works
- 6 Advanced Electrical Measurement Techniques Electrical and Electronic Engineering 1 works
- 7 Statistical and numerical algorithms Applied Mathematics 0 works
- 8 Advanced Frequency and Time Standards Atomic and Molecular Physics, and Optics 0 works
- 9 Physics and Engineering Research Articles Computational Mechanics 0 works
- 10 Advanced Sensor Technologies Research Biomedical Engineering 0 works
How open and international is its research?
Against the world's own shares: the tick on each track. Both are shares of its output, so they sit on one scale and can be read against each other as well as against the world.
World: 40% of research is openly available.
World: 18% is written across borders.
How has National Metrology Center's research output changed?
Output in 2022-2025 was 49% lower than in 2018-2021.
The same series as a ribbon: one cell per year, darker for more. The line above answers how much; this answers when.
Its share of all research
Growing output can still be a shrinking share: all of science grows. This is National Metrology Center as a percentage of every work published that year, 0.00010% in 2024.
Fractional works of National Metrology Center over all fractional works that year. How the balance of science has shifted.
Research measures only: rankings here say nothing about teaching, admissions or student experience. Comparable institutions and collaboration partners have tabs of their own, above.
Discussion
Ask a question or share a note about National Metrology Center. Keep it to the research: no personal attacks, advertising or links. Any reader can report a post, which collapses it for everyone until it is opened.
